Edging Around the House: A Gravel Strip Step by Step and Why It Protects the Facade
A strip of gravel along the walls of your house protects the plinth from mud, makes mowing easier and keeps the garden tidy. We show you how to make a gravel border step by step and how to finish it with steel edging.

Takeaway
A gravel border is the cheapest insurance for your facade: it carries rainwater away from the walls, protects the plinth from mud splashed up by rain and ends the problem of mowing right up against the wall. It only works if it's done properly – a slope away from the building, geotextile and edging that keeps the gravel from creeping onto the lawn.
At a glance
- A gravel border is usually 30–60 cm wide and about 15–20 cm deep.
- Shape the base with a slope away from the building and cover it with geotextile.
- Washed gravel in an 8–16 or 16–32 mm grade is the most common choice.
- Steel edging separates the gravel from the lawn and creates a clean line around the house.
Edging around the house is mostly associated with looks, but for a gravel border it serves above all a protective purpose. A strip of gravel along the walls of the building carries water away, protects the plinth from dirt and makes lawn care easier. A well-built border stays neat for years; a poorly built one fills with weeds and the gravel spills across the garden. Below, we explain how to make a gravel border around your house step by step and how to finish it with edging.
Why put a gravel border around your house
Rain falling from the roof and running down the wall hits the ground right next to the wall and splashes mud onto the plinth. Over time, streaks appear on the facade and water stands beside the wall. A gravel border solves both problems: water soaks quickly into the gravel and drains away from the building, and the stones don't splash soil. On top of that, the mower doesn't have to go right up to the wall, and plants don't grow directly against it, where they would hold moisture.
Edging around the house: dimensions and materials
| Parameter | Typical value | Notes |
|---|---|---|
| Width | 30–60 cm | wider for tall walls and large eaves |
| Depth | approx. 15–20 cm | depending on gravel grade and soil |
| Base slope | away from the building, approx. 2% | water must not drain toward the wall |
| Separation layer | geotextile | limits weeds and keeps gravel from mixing with soil |
| Gravel | washed, 8–16 or 16–32 mm | finer gravel spills more easily |
| Edging | steel 20–30 cm | 1–2 cm above the lawn |
Don't direct gutter water onto the gravel border – route downspouts away from the building, to a soakaway, a rainwater tank or a storm drain. The border takes the water falling beside the wall, not all the water from the roof.
A gravel border around your house, step by step
- 1Mark out the width
Stretch a string parallel to the wall at the chosen distance, usually 30–60 cm. - 2Dig the trench
Remove the turf and soil to a depth of about 15–20 cm, taking care not to damage the foundation insulation. - 3Grade the slope
The base should slope away from the building – compact the soil with a tamper. - 4Install the edging
Along the lawn side, set the steel edging so that it sits 1–2 cm (about 1/2–3/4 in) above the turf. - 5Lay the geotextile
Across the entire base, overlapping up the wall and under the edging. - 6Spread the gravel
Lay washed gravel in an even layer and level it with a rake.
We describe installing steel edging in detail in our guide how to install lawn edging, and you'll find a comparison of materials in the article lawn edging: steel, concrete or plastic.
⚠️ Don't damage the waterproofing
Work carefully when digging right next to the building – there may be damp-proof and thermal insulation on the foundation underground. Repairing it costs far more than the whole gravel border.
Choosing the color of edging and gravel around your house
The gravel border is visible from every side of the house, so it pays to match it to the façade. Black edging and graphite or gray gravel suit modern homes with anthracite windows. Corten and beige gravel warm up façades with wood, brick or light render – just keep in mind that in the first months Corten may leave rusty run-off stains, as we explain in our guide Corten edging. We've gathered shapes and ideas for finishing your garden with edging in the article garden edging – ideas and designs.
Gravel borders and plants next to the house
Plants set right against the wall hold moisture, and their roots can damage the foundation waterproofing. That's why the gravel border creates a buffer zone: planting beds begin only beyond the edging, at least several dozen centimeters from the wall. If you want to liven up the border, place a few planters on it or, at the corners of the house, plant low shrubs in the ground – on the other side of the edging. The gravel itself can be chosen to match the façade: gray for modern homes, beige for warm-toned render, graphite for dark roofs and window frames. Keep in mind that light gravel reflects more light and brightens the area by the wall, while dark gravel heats up faster and shows less dirt.
| ❌ Common mistake | ✅ Better this way |
|---|---|
| Border base with no slope | Slope away from the building, approx. 2% |
| Gravel poured straight onto the soil | Geotextile under the gravel |
| No edging on the lawn side | Steel edging 1–2 cm above the turf |
| Gutter spilling water onto the border | Gutter water directed away from the house |
Edging for a gravel border
For the border, choose garden edging in a height of 20 or 30 cm. You can accent the corners of the house with garden planters, and along the border you can place garden decorations – keeping a gap from the wall.
A clean line around the whole house
Steel edging in black or Corten – installed with ground anchors, no concrete needed.
Frequently Asked Questions
How wide should a gravel border around a house be?
Most often 30–60 cm. It's worth making the border wider along tall walls and where the roof overhang is large.
What gravel should I use for a border around the house?
Most often washed gravel in the 8–16 mm or 16–32 mm size range. Finer gravel scatters more easily and drains water less effectively.
Do you need geotextile under a gravel border?
Yes. Geotextile separates the gravel from the soil, limits weeds, and keeps the border clean for longer.
Does a gravel border drain water from the gutters?
It shouldn't. Gutter water is carried away from the building. The gravel border only takes the rainwater that runs down the wall and falls beside it.
What edging should you use for a gravel border?
Steel edging 20–30 cm (8–12 in) high, standing 1–2 cm (about ½ in) above the lawn. It creates a clean line, holds the gravel in place and doesn't get in the way when mowing.










