Metal Openwork Screens and Room Dividers for the Home – Matte Black from a Polish Manufacturer
Metal Openwork Screen Metal4Home is a steel plate with a laser-cut pattern, powder-coated in matte black, white or anthracite, or made of Corten steel. What you get from us is the openwork panel alone, ready to install – without a sliding system, frame or mechanisms – which you can set in place as a fixed openwork room divider between floor and ceiling, hang on a wall, mount in your own frame, or hang as a leaf in your own sliding system. One product that in practice replaces metal room divider, openwork and decorative screens, a room divider and a decorative wall panel.
Banana leaves rising above a bathtub, vertical slats casting a rhythm of shadows across the floor, a geometric grid that brings order to an open-plan living room – openwork in metal looks one way in daylight and another in the evening, when a lamp draws a lacy shadow out of it on the wall. Unlike fabric or wood, steel stays slim: a full-height divider is only a few millimeters thick, yet it stands firm for years.
Every panel is made at our workshop near Poznań, on a CNC laser cutting machine, and you can order it made to measure – with your own pattern, in a color from the RAL palette or in Corten steel. Below we explain how an openwork screen differs from a folding screen, how to choose the pattern and the degree of openness, how to install a panel in a living room, bedroom or by a staircase, and what to look out for when comparing metal with a wooden slat screen.
An Openwork Room Divider That Separates Space Without Blocking Light
Openwork Room Divider is a divider with openings that marks out zones in an open interior without cutting them off from each other: daylight passes through the pattern, air circulates freely, and the eye is only partly stopped. In a living room open to the kitchen, it separates the dining area from the sofa; in a studio apartment, it sets off the bedroom; in a house with a mezzanine, it closes off the stairwell void – and in each of these places it takes up a few centimeters of floor instead of the dozen or so a brick wall would swallow.
Metal openwork room dividers – that is, openwork panels set in profiles – beat wooden and plasterboard dividers on three counts. First, the pattern can be anything: the laser cuts leaves, branches, lattices, circles or letters into the sheet with the same precision, so the screen becomes a picture at the same time. Second, thin steel needs no frame to hold its shape – the panel is rigid on its own. Third, matte black is neutral: it sets off furniture, wood and textiles instead of competing with them.
When choosing openwork room dividers, it is worth looking at the share of openings. Patterns where the cut-outs make up 25–35% of the surface screen effectively and work well as a bedroom or walk-in closet divider. Patterns with 45–60% openness work mainly as decoration and organize the space visually without blocking the view – a good choice for a living room, dining room and mezzanine. When you order, we help you match the density of the openwork to the function the divider is meant to serve.
Openwork Screen or Metal Folding Screen? One Panel, Five Ways to Mount It
The difference between a screen and a folding screen comes down to how it is mounted. Metal Folding Screens are freestanding – they have a frame and feet and can be moved around. Openwork screen is permanently installed: floor to ceiling, on a wall or within a structure. Our panel is a plate that suits both scenarios, which is why we sell it without a frame, feet or hardware – you decide how to mount it, and we prepare the mounting holes for the solution you choose.
Mounting method
What you need
The result in your interior
Fixed floor-to-ceiling partition
Steel U-profiles or angle brackets anchored to the ceiling and floor
Openwork partition wall between the living room and kitchen, or the bedroom and walk-in closet
Wall-mounted panel
2–4 cm spacer sleeves and expansion anchors
Decorative wall panel with a play of shadows against the wall, e.g. behind a bed or bathtub
Infill for a frame with a foot
Frame made of hollow section (e.g. 30 × 30 mm) with feet – welded by a local metalworker or bolted together
Freestanding openwork room divider for a room or bathroom that can be moved around
Sliding panel
Barn door-style sliding system purchased separately; we drill the panel to match the spacing of its brackets
Openwork sliding partition that closes off a walk-in closet, pantry or home office
Balustrade infill or stair guard
Load-bearing balustrade structure made by an installer
Openwork screen for stairs and a mezzanine, in one pattern with the rest of your interior
The panel stays the same in every variant, so if you buy two or three in one pattern, you can install one permanently between rooms and frame another as decorative room divider – and your whole home will speak one language.
Black openwork screen – powder-coated steel in a deep matt finish
Black openwork screen is our basic variant: after laser cutting, the carbon steel is prepared and powder-coated in a color close to RAL 9005 with a matt finish. The coating doesn't reflect light, so the pattern reads purely as shape and shadow – without the glare that glossy finishes cause, distracting the eye and flattening the openwork.
A black openwork screen in a matt finish has one more advantage: it hides minor signs of use better than light colors and gloss, and the powder coating withstands bathroom humidity and kitchen vapors, doesn't yellow and needs no refinishing. Clean it with a damp cloth and soap – no abrasive powders or solvents.
Black is the most popular choice, but not the only one. For the same price you can order the panel in anthracite or white – a white openwork screen a frequent choice for bright, Scandinavian interiors. To order, we paint panels in other colors from the RAL palette, and if you prefer a natural, rusty texture, choose a Corten steel divider (for an extra charge), familiar from our garden panels. For indoor use, it's worth choosing Corten that has already been patinated and sealed against dusting – ask about this variant when requesting a quote.
Openwork screen patterns: leaves, slats, geometry and Art Deco
The pattern decides whether the screen metal openwork screen becomes the star of the interior or its quiet backdrop. The collection includes four families of motifs, and we can scale each of them to your dimensions:
Botanical motifs – banana leaves, monstera, grasses, branches, ferns. The most “picture-like” patterns, bringing a touch of the conservatory into your interior; best for a living room, bathroom and bedroom in a Japandi, boho or modern classic style.
Slats and lines – vertical or horizontal stripes of varying widths. This is the metal answer to the popular slatted openwork screen: the same rhythm, but in a single plate instead of dozens of battens, and with the gap density you choose.
Geometry – diamond lattice, circles and crosses in the spirit of the Bauhaus, a labyrinth of squares, gradient dots. They bring order to open-plan interiors in loft, industrial and minimalist styles.
Art Deco and Oriental – fans, seigaiha scales, Moroccan clover and arabesque. Repeating patterns that look great in large formats and in runs of several panels.
If you have your own idea – a logo, a view from your window, a child's drawing – we'll prepare a custom cutting design. There's one rule: every element of the pattern must be connected to the rest of the sheet, so our designer checks the drawing for rigidity before it goes to the laser.
Openwork screen in the living room and kitchen – an open daytime area with clearly defined zones
An openwork screen in the living room solves a problem every owner of an open-plan layout knows: the daytime area is bright and spacious, but the TV sits next to the stove, and the entryway leads straight onto the sofa. A floor-to-ceiling panel set perpendicular to the wall marks off a lounge corner without taking light from the windows, and its pattern works like a picture seen from both sides.
An openwork screen in the kitchen most often stands between the island and the dining area or by the entrance, hiding the work counter from the living room side. Metal beats wood and fabric here: it doesn't absorb odors, doesn't fade from steam, and you wash off greasy buildup with dish soap. By an island, patterns that are denser at the bottom and looser at the top work well – they hide the pots but don't cut off conversation.
In rooms 250–270 cm high, a divider reaching the ceiling or stopping 15–20 cm below it looks best if you want to keep a sense of lightness. A width of 90–120 cm is enough to separate the dining area from the sofa; for longer dividers, we combine two or three panels in one continuous pattern.
Room divider: bedroom, walk-in closet, entryway and home office
Room divider made of openwork metal makes sense anywhere a solid wall would be too heavy and a curtain too soft. In a bedroom, it separates the wardrobe or dressing table from the bed while hiding clothes on hangers – a pattern with about 30% open area is enough. In a studio apartment, it sets off a sleeping alcove without splitting the room into two dark spaces.
In a hallway, a panel placed between the entrance and the living room draws a guest's eye to the pattern rather than the sofa, and leaves room for a console table or coat rack. In a home office decorative room divider – that is, our panel set in a frame with a base – provides a backdrop for video calls and separates the desk from the living area, and after work you can move it against the wall.
You can make every one of these dividers in the same pattern as the metal wall art above the sofa – a consistent motif is the simplest way to make a home look designed as a whole rather than furnished in stages.
Openwork screens for stairs, mezzanines and bathrooms
An openwork stair screen is one of the most striking uses of openwork metal: a panel mounted along the flight or at the edge of a mezzanine replaces balusters and glass, and the pattern "grows" along with the stairs. Keep in mind that in this role the panel is an infill – the load-bearing structure of the railing and its fixing are done by an installer, and building regulations limit the size of gaps in railings (up to 4.7 in in multi-family buildings), which we take into account when scaling the pattern.
In a bathroom, the panel works as a divider between the tub and the shower area or as a backdrop behind a freestanding tub. The powder coating is resistant to moisture and steam, provided the room has good ventilation; constant contact with water, for example inside a shower enclosure, is best avoided. Steel doesn't rot or swell like wood, so it's one of the few openwork dividers you can put next to a tub without worry.
For a patio or balcony, where the divider is exposed to rain and frost all year round, we recommend our garden panels – the same openwork, but made for outdoor use.
Openwork screen with shelves, mirror and radiator cover – one pattern throughout the home
An openwork screen with shelves is a frequent request from customers who want a divider that doesn't just separate but also stores things. We solve it in two ways: by mounting next to the panel metal wall shelves in the same pattern, or by designing a screen with brackets that support wooden or glass shelves. The openwork above the shelf then works like a picture, and the shelf itself seems to float "in the air".
You can repeat the same motif in an openwork radiator cover under the window and in the frame of a decorative mirror in the hallway. When you order several pieces at once, you get one design and one quote, and the shade of black from a single powder-coating batch is identical on all the pieces.
Metal openwork screen or wooden slat screen? A comparison
The most common alternative to metal is the wooden slat screen made of vertical strips – slats of pine, oak or MDF. Both solutions look good, but they serve slightly different needs:
Feature
Metal Openwork Screen
Wooden slat screen
Divider thickness
A few millimeters of sheet metal, about 1.2–1.6 in in a frame
1.6–3.1 in (slats plus rails)
Design
Anything: plants, geometric, slats, your own design
Only the rhythm of the slats
Bathroom and kitchen
Resistant to moisture, steam and grease
Wood swells, MDF absorbs moisture
Mounting
One rigid panel bolted in profiles
Dozens of slats to level and glue
Maintenance
Damp cloth
Periodic oiling or varnishing
Dimensional stability
Doesn't warp or crack
Slats move with the humidity in the air
Cost
Quote per made-to-measure panel, without a carpenter's labor
Cheap material, time-consuming installation
If you want the warmth of wood, you can combine both materials: a black metal panel with a slat motif between oak posts or on an oak plinth is a pairing that appears more and more often in interior designers' projects.
Made-to-measure openwork screens – how to order a panel for your interior
Made-to-measure openwork screens is part of our everyday work: most panels in this category are made for a specific room. We cut formats up to 190 × 190 cm in a single piece; taller or wider room dividers are assembled from two or three modules that form one continuous pattern once installed. The standard sizes on the product page are just a starting point – we agree the dimensions, color and placement of the mounting holes individually.
Use
Typical width
Typical height
Living room–dining room or bedroom–walk-in closet divider
90–120 cm (one module)
Floor to ceiling, 250–270 cm (two modules)
Freestanding framed screen
80–120 cm
170–190 cm
Wall panel behind a bathtub or bed
100–190 cm
100–190 cm
Mezzanine railing infill
100–150 cm modules along the length of the railing
90–110 cm
How ordering works:
Send us the dimensions of the installation spot (width, height, room height) and a photo of the interior.
Choose a pattern from the collection or describe your own; tell us whether the panel should stand between floor and ceiling, hang on a wall, sit in a frame or run on a sliding system.
You'll receive a free quote and a proposal for how the pattern will be laid out – usually within 24 hours.
Once you approve it, we cut, paint and ship the panel, packed securely for transport; orders over €1,086.96 are delivered free of charge within Poland (except pallet shipments).
Architects, contractors and developers are welcome to B2B cooperation – we prepare series of panels in a single pattern for larger projects: hotels, restaurants, offices and stairwells. You can read about how our products are made on the page about our production process.
Installing a metal openwork partition step by step
Installing an openwork partition made of metal is simpler than building a wooden divider, because you have one rigid element instead of several dozen. A panel weighs roughly 8–15 kg per square meter, depending on the sheet thickness and the density of the openwork, so two people can lift a 100 × 190 cm segment.
Mark the centerline of the divider on the floor and ceiling with a plumb line or a cross-line laser – even 5 mm of deviation shows on a regular openwork pattern.
Fix U-profiles or angle brackets to the ceiling and floor with anchors suited to the substrate. With underfloor heating, don't drill into the floor – fix the panel to the ceiling and a side wall.
Slide the panel into the profiles and screw it in through the prepared mounting holes; leave 2–3 mm of play between modules to allow for movement of the material.
At floor level, place a rubber or felt pad under the edge of the panel so the steel doesn't ring when touched.
Touch up any scratches after installation with matt touch-up paint in the panel's color.
Don't simply lean the panel against a wall – without a frame with a base or fixings, it can tip over. If you want a freestanding version, order a frame from a local metalworker to the panel's dimensions, or ask us about a solution when requesting a quote.
Frequently asked questions about metal openwork partitions and decorative room dividers
What is an openwork partition?
An openwork partition is a divider with openings – a pattern cut into a sheet or built from slats – that splits an interior into zones without cutting off light and air. In metal, it is a single steel sheet with a laser-cut motif, installed permanently or set in a frame as a room divider screen.
What is the difference between an openwork partition and a screen?
A screen is freestanding and portable, while an openwork partition is installed permanently. Our panel works in both roles: set in profiles between floor and ceiling, it is a partition, and framed with a base, it becomes a metal screen.
What exactly do I get in the set?
Just the panel – a laser-cut, powder-coated steel sheet with mounting holes as agreed. The set does not include a frame, base, guide rails or a sliding system; this way you pay only for the panel and install it however your interior requires.
What material and colors are the openwork partitions made in?
Carbon steel powder-coated in matt black (a shade close to RAL 9005), white or anthracite – at the same price – or Corten steel for an extra charge. We can make a panel in another color from the RAL palette to order.
Is a metal openwork partition suitable for a bathroom?
Yes, the powder coating is resistant to moisture and steam, provided the bathroom is properly ventilated. We don't recommend installing it inside a shower enclosure, where the panel would be in constant contact with water.
What size can an openwork screen be?
Up to 190 × 190 cm in a single piece; larger dividers are assembled from several modules forming a continuous pattern. We cut each panel to size, so we can match it to your ceiling height and the width of the opening.
How much does a metal openwork panel weigh?
Roughly 8–15 kg per square meter, depending on the sheet thickness and the share of open areas. A 100 × 190 cm panel therefore usually weighs 15–28 kg, and two people are enough to install it.
Can the panel be installed as a sliding door?
Yes, the panel can work as the leaf in a barn door-style sliding system, which you buy separately. Tell us the system model or the spacing of the brackets, and we'll prepare the mounting holes in the right places.
Does an openwork screen provide privacy and soundproofing?
It screens partially, but it doesn't soundproof. With 25–35% openness, the panel effectively hides what's behind it; at 50% and above it works mainly as decoration. The openwork pattern doesn't dampen sound – for that you need a solid wall.
How do I install an openwork screen between the floor and the ceiling?
In U-channels or on angle brackets anchored to the ceiling and the floor; you slide the panel in and screw it in place through the mounting holes. With underfloor heating, fix it to the ceiling and a side wall, without drilling into the floor.
How much does a metal openwork screen cost?
The price depends on the size, pattern, sheet thickness and finish. You'll find prices for standard sizes on the product pages, we quote made-to-measure panels free of charge within 24 hours, and orders over €1,086.96 ship free within Poland – except for pallet shipments.
How do I clean a black openwork screen?
With a damp cloth and soap or dish soap, without abrasive powders or solvents. You can touch up minor scratches with matte touch-up paint in the panel's color.
Can I order an openwork screen with my own pattern?
Yes, we'll prepare a custom cutting design based on your drawing, logo or photo. We check it for the connections between elements so the panel stays rigid, and we send it to you for approval before cutting.
Have a room that calls for a divider without building a wall? Send us the dimensions and a photo via contact form – we'll reply within 24 hours with a quote and a pattern suggestion. We design and cut metal openwork screens and room dividers near Poznań as Polish manufacturer, and we deliver to any address in Poland.