Favorites
Pre-Holiday Inspiration and Christmas Decorations

How Many Ornaments for a Christmas Tree? Chart for 120–250 cm Trees and a Guide to Metal Ornaments

A 180 cm Christmas tree usually needs about 90 ornaments, but the number also depends on the tree's width and the size of the ornaments. A chart for heights of 120–250 cm, size proportions and rules for hanging metal ornaments.

Metal4Home Editorial Team6 min read
Christmas tree in a living room decorated with silver metal baubles on red ribbons

Short answer

A 180 cm Christmas tree needs about 90 ornaments for a moderate decoration. The formula is simple: 10 ornaments for every 30 cm of tree height for a sparse look, 15 for a standard one and 20 for a lavish one.

At a glance

  • A 150 cm Christmas tree takes about 50, 75 or 100 ornaments – depending on how densely you decorate it.
  • A slim Christmas tree needs roughly a third fewer ornaments than a full, spreading one.
  • Hang large ornaments low and close to the trunk, small ones on the branch tips and near the top.
  • Metal ornaments are heavier than glass ones, but they don't break. They belong on the thicker branches.

Shortages of ornaments usually show up when the tree is already standing and the stores are closed. But you can work out how many ornaments you need from the tree's height and width before you take the boxes out of the basement.

How Many Ornaments for a Christmas Tree – Chart by Tree Height

Height is the starting point. For every 30 cm of tree, allow 10 ornaments for a sparse decoration, 15 for a standard one and 20 for a lavish one. These numbers apply to a classic, full-shaped tree and ornaments 6–8 cm in diameter.

Tree heightSparseStandardLavish
120 cm40 ornaments60 ornaments80 ornaments
150 cm50 ornaments75 ornaments100 ornaments
180 cm60 ornaments90 ornaments120 ornaments
210 cm70 ornaments105 ornaments140 ornaments
250 cm85 ornaments125 ornaments165 ornaments

These numbers cover all hanging decorations: ornaments, icicles, figurines and handmade pieces. Garlands, lights and the tree topper are counted separately.

How many ornaments for a 150 cm Christmas tree

From 50 to 100 pieces. At this height, 6 and 8 cm ornaments look great, and a few 10 cm ones are enough for the lower branches.

How many ornaments for a 180 cm Christmas tree

From 60 to 120 pieces, about 90 for a standard decoration. A 180 cm tree fits under a 250 cm ceiling together with the stand and topper, which is why it works in most homes.

How many ornaments for a 220 cm and taller Christmas tree

About 110 for standard decoration and 150 for rich decoration. A tall tree is viewed from a distance, so it's better to add larger ornaments than to multiply small ones.

What Determines the Number of Christmas Tree Ornaments

Tree width and fullness

The table assumes a full, wide tree. A tree with a diameter one third smaller also has roughly one third less surface to decorate, so you can subtract that many ornaments. A dense Nordmann fir will take more baubles than a sparse spruce, because it has more branches to hang them on.

Ornament size

One 10 cm bauble takes up as much space on the tree as three or four 5 cm baubles. If you mostly have large ornaments, go to the lower limit in the table. With small ones only, use the upper limit.

Lights, garlands and bows

Every yard of garland and every large bow replaces several hanging ornaments. A tree with a wide ribbon wound in a spiral needs fewer baubles than a tree dressed only in lights. For lights alone, allow roughly 100 bulbs for every 20 inches of height.

How to Choose Ornament Sizes and in What Order to Hang Them

A split into three sizes works well: half medium ornaments, about 30% small and 20% large. The tree then has several layers and doesn't look flat.

  1. 1
    Lights
    Start with the lights and run the cord deep into the branches too, close to the trunk.
  2. 2
    Large baubles
    Hang them in the lower half of the tree and deeper between the branches. They fill gaps and provide a backdrop.
  3. 3
    Medium baubles
    Spread them evenly across the whole tree, about a hand's width apart.
  4. 4
    Small ornaments
    Hang them at the tips of the branches and in the upper part, where the branches are thin.
  5. 5
    Check from a distance
    Step back ten feet and squint. Dark patches are spots where an ornament or light is missing.
❌ Common mistake✅ Better this way
All the baubles at the tips of the branchesPlace some ornaments deeper, near the trunk – it gives the tree depth
One ornament size across the whole treeThree sizes: large low, small high
Heavy ornaments on thin branchesMetal and large glass on thicker branches, closer to the trunk
Buying baubles by eyeThe number from the table plus 10% extra for breakage

Metal Christmas Tree Ornaments – Sizes, Colors and Hanging

A metal bauble is a flat, openwork ornament laser-cut from sheet steel. We make these ornaments in our factory near Poznań, and we've gathered all the designs in the category baubles and Christmas tree decorations.

Sizes and Finishes of Metal Ornaments

You can order each design in three sizes: 6 × 6, 8 × 8 and 10 × 10 cm.

Powder-coated baubles

You can choose from white, black, red and green. The matt finish doesn't reflect the lights, so the openwork pattern reads like a drawing against the branches.

Steel and brass baubles without lacquer

Polished or satin steel gives a silver shine, and brass gives gold. Polished works like a mirror and shimmers with every movement, while satin diffuses the light.

How to Hang Metal Ornaments on a Christmas Tree

A metal ornament won't shatter if it falls on the floor, which is why it works well in homes with small children and cats. It's heavier than a glass one, so it calls for a few different habits.

  • Hang 10 cm baubles on the thicker branches, closer to the trunk. The six-centimeter ones will stay put at the tips of the branches.
  • Run the lights behind the baubles. The openwork then casts a shadow on the branches, and polished metal reflects the light.
  • Position the flat ornament facing the room. If it spins, shorten the ribbon.
  • On one tree, combine two finishes at most, for example gold brass with white, or black with steel.

Metal baubles from our range

How Many Metal Ornaments to Add to Glass Ones

You don't need to replace the whole collection. Metal ornaments look great as one third of all your hanging decorations. On a 180 cm (6 ft) tree with standard decoration, that's about 30 pieces, ideally in one color and two sizes. Pair openwork snowflakes, stars and ornaments with plain glass baubles so the pattern has a calm backdrop.

Standing ornaments in the same finish complete the set. For a dresser or windowsill, choose small decorative metal Christmas trees.

For the table and an Advent wreath, these will come in handy Christmas candle holders and lanterns.

Companies order baubles with their logo from us as client gifts. The quote is free and starts with a form custom design.

Storing Ornaments After the Holidays

Wipe metal baubles with a dry cloth and place them in a box layered with paper so they don't get scratched. You don't need to wrap each one separately. Keep glass ones in dividers or in their original trays, in a place with a stable temperature.

We've described cleaning and protecting the ornaments for the next season separately in the guide how to care for metal Christmas decorations.

You'll find the other types of metal decorations in our overview metal Christmas ornaments.

Ornaments that will last through many Christmases

Openwork metal ornaments in three sizes: powder-coated, steel and brass.

See metal ornaments →

Frequently Asked Questions

How many ornaments for a 180 cm Christmas tree?

About 60 for a sparse look, 90 for a standard one and 120 for a lavish one. A slim tree needs roughly a third fewer ornaments.

How many ornaments for a 150 cm Christmas tree?

From 50 to 100 pieces. A standard-decorated tree of this height holds about 75 hanging ornaments.

How many ornaments for a 120 cm Christmas tree?

From 40 to 80 pieces, ideally in 6 and 8 cm sizes.

What ornament sizes should I choose for one tree?

Three sizes: about half medium, 30% small and 20% large. Large ones go at the bottom and deep inside the tree, small ones on the branch tips and near the top.

Will the branches hold metal baubles?

Yes. Openwork ornaments of 6–10 cm work well on both real and artificial trees. Hang the largest ones closer to the trunk, on the thicker branches, and the smallest on the branch tips.

Can metal ornaments be ordered with a company logo?

Yes. We quote an ornament with your own design, logo or lettering free of charge, based on a submission through the custom project form.

Products from the article: Christmas Ornaments and Tree Decorations

View all

Metal4Home Editorial Team

The Metal4Home team – designers and technologists from a Polish workshop that makes metal decorations for the home and garden. We write about what we work with every day in production: materials, finishes, installation and styling ideas.