Favorites
Cocktail Stirrers

Product code: 31803.190.46.SN

Hat Cocktail Stirrer – Halloween Witch

€10.65

Lead time for the selected product variant: Choose a variant

  • PayPal
  • Visa
  • Mastercard
  • Google Pay
  • Apple Pay

Buying for a business or in larger quantities? Request a B2B quote

Hat Cocktail Stirrer – Halloween Witch

In a 300 ml glass that is 95 mm tall, the stirrer sticks out 95 mm above the rim, so the 46 × 60 mm motif sits entirely above the drink line. The perforated 55 × 18 mm paddle with three Ø 5 mm holes stays in the glass for the whole drink: it mixes syrup with ice and presses fruit to the bottom. This is a bar tool with the motif on top, not a decoration on a stick.

Design

A hat with a bent tip, a 12 × 9 mm buckle on the band and three five-pointed stars on the cone. 72% fill, the highest in the series.

Material and finish

304 stainless steel with no coating, lacquer or paint, the only material in this shop that is meant to go into a drink. Powder coating has no place here: citrus acid undercuts it from the edges, and a dishwasher strips it from the cut edges within a dozen or so cycles. Choose satin or polished; corners are rounded and edges smoothed.

Product details

Construction

The whole piece is a single element cut from one sheet, with no welds, rivets or glued-on parts. The motif joins the shaft along its full edge, and all the details are openings cut within the material, so nothing sticks out and nothing can break off when washing.

Section Dimension Function
Paddle 55 × 18 mm, 3 holes Ø 5 mm stirs the drink and muddles fruit
Shaft 9 × 50 mm brings the total length to 190 mm
Spiral 25 mm tall, 90 mm of ribbon transition to the motif, sits at the height of the glass rim
Design 46 × 60 mm fully visible above the drink line
Overall 190 mm, 99 g one piece, no welds or rivets

Which glasses it fits and how to clean it

For tumblers and thick-bottomed glasses with a base diameter of 60 mm or more. At 99 g, a stirrer resting against the rim will tip a vessel lighter than 200 g, so stemmed glasses are not suitable. Dishwasher safe up to 60°C; in mulled wine at 70°C the top part reaches 45–55°C after about 90 seconds and is then no longer comfortable to touch.

Durability and storage

Stainless steel has no layer that could wear off, so after ten seasons the surface looks the same. Hard-water streaks are calcium carbonate, not damage, and come off with citric acid at a teaspoon per glass of warm water. After a party the stirrer goes back in the cutlery drawer; it is 3 mm thick. The manufacturer is Metal4Home, a brand of Adjatech Metalworking Sp. z o.o., a metal decoration manufacturer from Poznań.

Questions and answers

Frequently Asked Questions

Will it fit my glasses?

For tumblers and thick-bottomed glasses with a base diameter of 60 mm or more. The stirrer is 190 mm long and sticks out 95 mm above the rim of a 300 ml glass, 90 mm with a 350 ml one. Not suitable for stemmed glasses — at 99 g, resting against the rim it will tip thin-walled glass.

Can it go in the dishwasher?

Yes, on a program up to 60°C. Avoid intensive programs above 65°C and tablets containing chlorine bleach. Rinse the Ø 5 mm holes in the paddle before loading the dishwasher, because fruit pulp stays in them.

Satin or polished?

Satin has a diffused sheen and stands out most against a dark, cloudy drink; this is the finish shown in the photos. Polished gives a mirror reflection and looks better with light-colored drinks and candlelight, but shows fingerprints more clearly than satin.

Can I muddle fruit with it?

Yes, and that is the paddle's actual job: the three Ø 5 mm holes let the drink pass through, so the pressure goes into the fruit rather than the liquid. Raspberries, blackberries, blueberries and sliced strawberries: press down and make 3-4 quarter turns. Do not muddle citrus with the peel or mint leaves.