





Product code: 1360.60.60.CZ
Buying for a business or in larger quantities? Request a B2B quote
The featured wall pergola is a masterful combination of two forms. The left side of the panel shows organic bamboo shoots and leaves, cut with exceptional precision. The right side, in turn, transitions into a stark, geometric trellis. Thanks to this design, it is an ideal pergola for climbing plants – a plant (such as fragrant jasmine or clematis) can climb freely up the right-hand rungs, while the decorative bamboo motif on the left stays visible, creating a stunning contrast. Mounted on spacers, it casts beautiful, deep shadows onto the building facade in the sunlight.
We design our products to last for years. This model is made from a single sheet of durable steel plate with a thickness of 3 mm. This ensures absolute rigidity and resistance to the weight of growing plants. Unlike mass-produced solutions, our metal pergola will not bend under strong wind.
The product is available in square proportions to choose from:
60×60 cm – excellent as a compact balcony pergola in an apartment building.
100×100 cm – a great choice for spacious terraces or as the main decorative focal point of a house facade.
To match the panel perfectly to your space, we offer two finishes:
Matte black – an elegant, powder-coated finish that looks great on light facades (as in the attached photo). It makes an excellent base for modern garden pergolas.
Corten – steel that naturally develops a rusty-brown patina over time. It goes beautifully with the warm colors of plants and the Asian character of the bamboo motif.
Thanks to its hanging-panel form, this is an exceptionally versatile solution. It works perfectly as a patio pergola, mounted just above the seating area. It also looks great in a setup where beneath it sits a planter with a pergola on the patio, and the shoots climb straight from the planter up the steel panel.
Questions and answers
Yes. The use of steel with a thickness of 3 mm makes this an exceptionally sturdy metal pergola, whose load capacity far exceeds the needs of standard balcony or patio climbers.
The panel is designed as a wall-mounted pergola. It has dedicated mounting holes in the corners. The panel hangs on special spacers (visible in the photo as round covers), which provide the right gap from the wall – essential for climbers to wind freely and for proper air circulation.
Absolutely! The size of the 60×60 cm was created with exactly such places in mind. It's a great balcony pergola, which lets you grow beautiful plants without giving up valuable floor space.
No, the natural patina process of Corten steel is completely safe for plants. The protective layer that forms stabilizes over time and beautifully sets off the green and colorful leaves of the climbers.
| Material: | Corten, Steel (black paint finish) |
|---|---|
| Dimensions: | 100x100cm, 60×60 cm |
| Room | Patio and balcony, Garden |
| Size | |
| Mounting and display | Freestanding, Outdoor (weather-resistant) |
| Finish and color | |
| Themes | |
| Occasion and gift |
Size and layout
An openwork wall pergola is a steel panel that you attach to a wall, pillar or fence as a support for climbing plants. One panel makes a decoration, and several side by side make a whole green wall. Check the size you want and calculate how many panels will fit on your wall.
Your pergola
Enter the dimensions of the section of wall or fence you want to cover with climbers. We count panels in the selected size with a gap of approx. 10 cm (4 in).
Finishing
We make every design in two versions: in Corten steel with a natural, rusty patina, or in steel with a black, matte powder-coated finish. Below are both finishes on a white background and up close.
A warm, rusty color that darkens over time. The patina protects the steel — no painting or maintenance needed. It pairs beautifully with the green of climbing plants.
Deep black powder coating — a bold, graphic pattern against a light facade, plaster and concrete.
Matt, rusty patina, an even openwork edge and a mounting hole in the corner of the panel.
A uniform, matt coating with no shine and clean, sharp pattern edges.
| Feature | Corten | Matte black |
|---|---|---|
| Look | rusty patina, warm color | deep, matte black |
| Change over time | the color darkens and deepens | stable color |
| Care | no painting or sealing needed | wash with water, no abrasive cleaners |
| First few weeks | rain may stain a light facade beneath the panel | no runoff stains |
| Best suited for | brick, wood, naturalistic gardens | white plaster, concrete, modern facades |
Illustrative photos — the pergola pattern in the photos may differ from the one you select.
Climbing plants
The panel's openwork pattern is a ready-made support: you weave the shoots through the openings or tie them with soft twine. Match the plant to the location and its vigor — for heavy climbers, choose the 100 × 100 cm panel and a solid fixing into masonry.
| Climber | Location | Character | Panel |
|---|---|---|---|
| Clematis | sun, partial shade | moderate growth, abundant blooms | 60 × 60 or 100 × 100 cm |
| Climbing rose | sun | shoots need to be tied in | 100 × 100 cm |
| Honeysuckle | sun, partial shade | fragrant flowers, twines on its own | 60 × 60 or 100 × 100 cm |
| Ivy | partial shade, shade | evergreen, dense greenery all year round | 60 × 60 or 100 × 100 cm |
| Grapevine | sun, warmth | vigorous growth, fruit | several 100 × 100 cm panels |
| Wisteria | sun | very strong and heavy with age | several 100 × 100 cm panels, masonry mounting |
Plant the climber in the ground or in a planter beneath the panel — our following products are a good match Corten steel garden planters.
Weather resistance
The 3 mm steel panel stays on the wall all year round: it doesn't bend under climbing plants or in the wind, doesn't crack in frost and doesn't fade in the sun.
Moisture speeds up the patina on Corten steel. Mounting on spacer sleeves holds the panel away from the wall, so the wall dries quickly.
Steel doesn't crack in frost. The panel stays on the wall through winter, and the openwork pattern still decorates the facade when the climbers lose their leaves.
The patina and black coating don't fade, and the openwork panel, set off the wall, casts a decorative shadow on the facade.
Rigid 3 mm sheet steel fixed at four points doesn't warp under wind pressure or the weight of plants.
No taking it down for winter and no repainting — the pergola grows into the garden together with the climber.
Illustrative photos — the pergola pattern in the photos may differ from the one you select.
Mounting
Mark the position of the panel and the four mounting points — check that it's level. Leave room for a planter or flower bed underneath.
Through the holes in the corners, mark and drill holes in the surface; choose anchors or wall plugs to suit brick, concrete or the fence.
Screw the panel onto the spacer sleeves — the gap from the wall leaves room for shoots and lets air circulate next to the masonry.
Plant the climber under the panel and weave the shoots through the openwork pattern or tie them with soft twine.
Included
Uses
A green wall by the entrance or on a blank gable end.
Several panels in a row turn a fence into a living, flowering screen.
A 60 × 60 cm panel above a planter — greenery without taking up floor space.
A backdrop for a seating area and a screen for the wall by the table.
A series of panels in restaurant gardens, hotels and offices.
Illustrative photos — the pergola pattern in the photos may differ from the one you select.
Metal pergola manufacturer
As the manufacturer, we'll make a wall pergola in any size and with your own pattern — a single piece or a series for facades, fences, hotels and restaurant gardens.
Questions
This is a flat, openwork steel panel that mounts to a wall, pillar or fence. It serves as a support for climbing plants and as a facade decoration — the pattern adorns the wall even when the plants lose their leaves.
For a sunny wall: clematis, climbing rose, honeysuckle or grapevine. In partial shade and shade: ivy. Very strong and heavy climbers, such as wisteria, should be trained over several 100 × 100 cm panels mounted on the wall.
The panel is made of rigid 3 mm steel sheet and is fixed at four corners, so it does not bend under the weight of plants. The load capacity of the whole installation also depends on the substrate and the anchors — for heavy climbers, mount the panel on a masonry or concrete wall.
The panel is screwed to the wall through the holes in the corners, using spacer sleeves that hold it away from the wall. Choose plugs or anchors to suit the substrate — different ones are used for brick, concrete or a fence.
Divide the width and height of the wall by the panel size plus the spacing (e.g. 10 cm) and round down. For your chosen size, the "How many panels fit on your wall?" calculator above will do it for you — it can also set the quantity in your cart right away.
In the first few weeks, while the patina is forming, rain can wash rusty residue from Corten steel onto a light-colored facade or the paving beneath the panel. Mounting on spacers and protecting the surface below during that time limits staining; it stops once the patina has stabilized.
Yes. Steel does not crack in frost, Corten steel is protected by its patina, and black steel by a powder-coated finish. A rigid 3 mm panel fixed at four points does not warp in the wind.
Solid 3 mm steel sheet weighs about 23.6 kg per m², and the openwork reduces this weight depending on the pattern. We show the upper weight limit for your chosen size in the "Your pergola" section.
Yes. We will make a pergola in any size, with your own pattern or logo, in Corten steel or black — also in series. The quote is free: custom design, B2B cooperation.
Corten steel needs no painting — do not scrub the patina or use chemicals. A black pergola only needs washing with water and a mild detergent. Once a season, check the fixings and trim any shoots that have wrapped too tightly around the openwork.
Metal Garden Pergola with Koi Carp Motif 1369€70.43
Modern Terrace Pergola with Star Motif 1368€70.43
Metal Balcony Pergola with City Motif 1367€70.43
Steel Terrace Pergola with Fern Pattern 1366€70.43
Modern Metal Pergola with Gothic Pattern 1365€70.43
Metal Wall Pergola with Fibonacci Spiral Motif 1364€70.43
Metal Garden Pergola with Wisteria Motif 1363€70.43
Metal Terrace Pergola with Hummingbird Pattern 1362€70.43We use cookies to make it easier for you to navigate and to enable certain features. You will find detailed information about all cookies below under each consent category.
Cookies classified as "necessary" are stored in your browser because they are essential for enabling the basic functionality of the website.
We also use third-party cookies that help us analyze how you use this website, store your preferences, and deliver content and ads that are relevant to you. These cookies will be stored in your browser only with your prior consent.
You can enable or disable some or all of these cookies, but disabling some of them may affect your browsing experience.
