Favorites
Metal Loft Sliding Doors

Product code: 9305.100.CZ

Rays Loft Door – Metal Sliding Door Leaf with Sun 9305

€417.17

Lead time for the selected product variant: Choose a variant

  • PayPal
  • Visa
  • Mastercard
  • Google Pay
  • Apple Pay

Buying for a business or in larger quantities? Request a B2B quote

Loft Door Rays – metal sliding door panel with a sun

The sun in the lower right corner sends a fan of straight rays toward the top edge, while a few arcs at the bottom complete the composition. It is one of the most "architectural" patterns in the collection – all lines, no ornamentation. This is a loft door for people who like a clean, graphic loft look without fussy details.

The rays are not parallel, so the light passing through the panel fans out across the floor. In the photo, the door separates a dining room with black chairs and a brass lamp from the living room.

Styling idea: sliding dining room door with a "rays" motif

They look best in the passage between the dining room and the living room or kitchen, in an apartment with a high ceiling and a light wood or concrete floor. The character of the pattern suits loft and industrial interiors with brass lamps and black chairs. A rising sun is a motif of energy and a new beginning – and in a version made of straight lines, it fits both the Art Deco and loft aesthetic. Rooms: dining room, living room.

What you're buying – the sliding door leaf only, without the hardware system

Included in the price: leaf only: a 3 mm steel plate with a laser-cut pattern, ground edges and a powder coating. The track, carriers, bottom guide, stops and handle are bought separately – any wall-mounted sliding system with a load capacity of at least 60 kg will fit. That way you don't pay for a set that doesn't suit your wall, and you can use a system in black, steel or brass.

On request, we drill the holes for your system's carriers – just give us the spacing in the order notes. We explain how to choose the track and rollers in the metal sliding doors category.

Product details

"Rays" door panel – dimensions, weight and opening

Measure the opening without the door frame and add 5 cm on each side: 80 cm → 90 cm panel, 90 cm → 100 cm, 100 cm → 110 cm. A height of 210 cm covers a standard 200 cm opening. Shown in the photo: a 100 cm panel; the "rays" composition is adapted to each of the three widths.

Door leaf (W × H) Screening Weight Variant code
90 × 210 cm opening up to 80 × 200 cm approx. 37.5 kg 9305.90
100 × 210 cm opening up to 90 × 200 cm approx. 41.5 kg 9305.100
110 × 210 cm opening up to 100 × 200 cm approx. 45.5 kg 9305.110

You will find the full sizing rules, including for double doors and non-standard openings, in the category description; we will prepare any other size as part of custom order project.

"Rays" door panel finish – three colors, one price

In the photo, the panel is matte black – the finish that gives the strongest contrast against a light wall and shows off the "rays" motif most clearly. A white sliding door blends into a light wall and mainly shows shadows in the cut-outs, while anthracite is softer than black and goes well with concrete and shades of gray. All three colors are powder-coated and cost the same.

We quote a different color from the RAL palette or a non-standard size as part of custom order project – free of charge, with a visualization for your approval.

Track installation – step by step

You screw the track to the wall above the opening – on a brick or concrete wall with the expansion anchors included in the system set, on a drywall partition into the studs or a wooden mounting beam. You hang the panel, weighing approx. 41.5 kg (100 × 210 cm), on the rollers and set the bottom guide, which keeps the steel panel upright. Stops at the ends of the track prevent it from sliding off.

A door frame is not needed; the edge of the opening only needs finishing with plaster or a trim strip. You will find a detailed description of installing wall-mounted sliding doors in the category.

Specifications

Leaf specifications

  • Material: 3 mm laser-cut steel, ground edges
  • Finish: powder coating – matte black, white or anthracite
  • Door leaf sizes: 90 × 210, 100 × 210 and 110 × 210 cm (for openings of 80, 90 and 100 cm)
  • Cut-out share: approx. 16% of the surface
  • Weight: approx. 37.5–45.5 kg (depending on width)
  • Included: door leaf only; we drill the roller holes on request
  • System required: wall-mounted sliding system with a load capacity of at least 60 kg, rollers for a 3 mm plate, bottom guide
  • Use: dining room, living room
  • Product code: 9305 (variants 9305.width.color, e.g. 9305.100.CZ)

Questions and answers

"Rays" loft door – questions and answers

How do steel loft doors differ from glass loft doors?

A glass loft door is a pane in a black frame – it shows everything and hides nothing. Our panel is a solid 3 mm steel plate with a cut-out motif: it covers approx. 84% of the opening, lets light through only via the pattern and needs no door frame. It also looks lighter than a door made of solid sheet metal.

Can I install the "Rays" loft door on a drywall partition?

Yes, as long as the track is screwed into the structural studs or a wooden mounting beam anchored to the studs – not into the board alone. A 100 × 210 cm panel weighs approx. 41.5 kg, so the track mounting must carry this weight with a safety margin.

Is the "Rays" door panel available in white or anthracite?

Yes – in the shop you can choose matte black (as in the photo), white or anthracite at the same price. We quote any other color from the RAL palette as part of custom order project.

How much does the "Rays" door panel (loft door) weigh?

The weight depends on the width: 90 × 210 cm – approx. 37.5 kg, 100 × 210 cm – approx. 41.5 kg, 110 × 210 cm – approx. 45.5 kg. It is 3 mm steel reduced by approx. 16% for the cut-outs. The track carries the weight, so a single finger is enough for everyday sliding.

See also

You'll find more designs in the category metal loft sliding door. To complete the look, add metal wall art cut from the same steel – the motif from the door can be repeated on the wall next to it. See also: Cat Interior Sliding Door and the Cubes industrial sliding door. Have a question about size or hardware? Write to us via contact form.

Dimensions

Which door panel size should I choose?

A sliding door panel is always larger than the opening it covers — it overlaps the wall by about 5 cm on each side and about 5 cm at the top. This hides the gaps and looks good in any position. Choose a width and we'll show you which opening it fits.

Need a different size? Write to us — we'll prepare a quote for a made-to-measure door panel.

How do I measure the opening?

  1. Width — measure the opening at the top, in the middle and at the bottom; use the smallest result.
  2. Height — from the floor to the top edge of the opening, on both sides.
  3. Free wall space — on the side the door slides to, you need a strip of wall at least as wide as the door panel, with no switches or outlets; above the opening — room for the track.

Choose the size where "Fits opening" is equal to or larger than your measurements.

Finishing

Matt black, white or anthracite?

We make every pattern in three finishes. Matt black emphasizes the openwork design and suits loft-style interiors, white blends into a light wall, and anthracite is a softer, elegant alternative to black.

Illustrative photos — the door panel pattern in the photos may differ from the one you choose.

Included

What you get and what you choose separately

Openwork panel of a metal sliding door — set contents (illustrative photo)

Included

  • Openwork steel door panel in your chosen size and finish.
  • Pattern joined into one piece with the frame — ready to mount in a sliding system.

Chosen separately

  • Sliding system: track (rail) with carriages and stops.
  • Floor guide that keeps the door panel upright.
  • Handle or pull bar — in a style matched to your interior.

Choose the sliding system to match the width and weight of the door panel — check its maximum load capacity.

Construction

Steel and a durable finish — a door panel that stays a door

Close-up of the openwork pattern of a metal sliding door

A pattern joined into one piece

Every element of the openwork is joined to the door panel frame. Nothing sticks out or rattles when you slide the door, and the panel stays rigid.

Light passing through the openwork of a metal sliding door

Openwork in moderation

We design the patterns to let light through and cast a striking shadow while still separating the rooms — it's a door, not a window.

Edge and coating of a metal sliding door panel

Durable coating

The matt coating is resistant to scratches and indoor moisture. For everyday care, simply wipe it with a damp cloth.

Mounting

Installation in 4 steps

You mount the door panel on a wall-mounted sliding system — the track runs above the opening, and the door slides along the wall. Next to the opening you need free wall space as wide as the door panel.

Measuring the door opening before installing a sliding door

Measure the opening and the wall

Check the width and height of the opening and the free wall space next to it that the door panel will slide onto.

Sliding system track mounted above the opening

Mount the track

Screw the track in above the opening, level, following the instructions for your chosen sliding system.

Sliding system carriages at the top edge of the door panel

Prepare the door panel

Attach the carriages to the top edge of the door panel, along with the handle — following the system instructions.

Hung metal sliding door with a floor guide

Hang and adjust

Hang the door panel on the track, set the stops and the floor guide. Done.

Uses

Where openwork sliding doors work best

Metal sliding door at a walk-in closet entrance

Wardrobe

It screens the inside of the closet, while the openwork lets it breathe.

Metal sliding door in a bedroom

Bedroom

No space is lost to a swinging door, which makes it ideal next to a bed or wardrobe.

Metal sliding door for a home office

Home office

It sets your workspace apart without cutting it off from the light in the rest of the house.

Metal sliding door between the living room and kitchen

Living room and kitchen

An elegant partition that becomes a showpiece of the whole wall.

Illustrative photos — the door panel pattern in the photos may differ from the one you choose.

Questions

Frequently asked questions about metal sliding doors

Are the track and rollers included?

No. The set includes only the openwork door panel in the size and finish you choose. You select the sliding system separately — the track with rollers, the stops and the floor guide — to suit the width and weight of the panel.

What size should I choose for my opening?

The panel should be about 10 cm wider than the opening (about 5 cm on each side) and about 5 cm taller. For example, a 90 × 210 cm panel fits an opening up to about 80 cm wide and up to about 205 cm high. Next to the opening you need a free section of wall as wide as the panel.

Does the openwork provide privacy?

The patterns are openwork in moderation: they let light through and cast a striking shadow, but they still visually separate the rooms. Where you need full privacy, choose a pattern with a denser design or write to us — we'll advise you.

Can I order a panel in a different size?

Yes. If your opening requires a different size, write to us — we'll prepare a quote for a made-to-measure panel in the pattern and finish you choose.

How do I care for the surface of the panel?

Simply wipe the panel with a soft, damp cloth. Do not use abrasive cleaners or solvents, so you don't dull the coating.