Favorites
Coat Rack

Product code: 3515.40.CZ

Metal towel racks 3515 Whale – 3 mm steel, 5 hooks

€23.70

Lead time for the selected product variant: Choose a variant

  • PayPal
  • Visa
  • Mastercard
  • Google Pay
  • Apple Pay

Buying for a business or in larger quantities? Request a B2B quote

Metal Whale Towel Racks

A whale with a fountain of water above its head swims over a bar with five towel hooks – the fountain is made of thin arcs, and the whale's belly is marked with lines. A calm, low-profile motif for the bathroom. It's one of our metal towel racks made of 3 mm steel – for towels and bathrobes.

In the photo, a black rack hangs next to the window in a bright bathroom with a wooden vanity cabinet; a towel hangs on the hooks. Matt black on a white wall looks like a kid's drawing for grown-ups.

Bathroom rack – where to hang the Whale rack?

For a family bathroom, a child's bathroom, a guest toilet or a sauna – for towels and bathrobes. Rooms: bathroom. In the shop, you'll also find it in the category bathroom racks.

Product details

Whale rack – dimensions, hooks and weight

Choose the width to match the furniture underneath: the 60 cm rack suits a chest of drawers 80–100 cm wide, 40 cm suits a shoe cabinet, and 80 cm suits a bench in a wide hallway. Pictured: 40 cm version, 5 hooks.

Width Height (with motif) Number of hooks Weight Variant code
40 cm 20 cm 5 approx. 1 kg 3515.40
60 cm 30 cm 8 approx. 2.3 kg 3515.60
80 cm 40 cm 10 approx. 4.1 kg 3515.80

Whale rack finish

In the photo the rack is matte black – on a light wall it gives the strongest contrast and shows off the whale motif most clearly. White blends into a light wall and works mainly through shadow, so Scandinavian-style interiors with colored walls tend to choose it; anthracite is softer than black and goes well with grays. All three are powder-coated and cost the same.

Installation – two screws and fifteen minutes

The rack has two holes in the bar: hold it against the wall, level it, mark the holes and drill for anchors suited to your wall (6 mm expansion anchors for masonry, toggle bolts for drywall, short screws for wood). Recommended height: 150–170 cm from the floor to the hooks, so the towels don't touch the sink or countertop; for children 100–110 cm. The 40 cm rack weighs about 1 kg.

Specifications

Rack specifications

  • Material: 3 mm laser-cut steel, hooks bent from the same plate, ground edges
  • Finish: powder coating – matte black, white or anthracite
  • Sizes and hooks: 40 cm – 5 hooks; 60 cm – 8 hooks; 80 cm – 10 hooks
  • Height with motif: 20 / 30 / 40 cm
  • Weight: approx. 1–4.1 kg
  • Mounting: wall-mounted, 2 holes in the rail (you choose screws and anchors to suit your wall)
  • Use: towels and bathrobes
  • Rooms: bathroom
  • Product code: 3515 (variants 3515.width.color, e.g. 3515.40.CZ)

Questions and answers

Metal towel racks – questions and answers

Won't metal whale towel racks rust in the shower?

No – the steel is powder-coated on all sides, including inside the cut-outs, so steam and water droplets don't reach the metal. In a bathroom without a window, make sure it's ventilated; wipe the rack with a dry cloth now and then so limescale marks don't build up.

How do you ship the Whale rack and how long does it take?

The coat rack ships by courier in a rigid cardboard box with protected hooks; for orders over PLN 5000, delivery within Poland is free. We confirm the lead time by email after you place your order. Details: delivery types and costs.

How do I mount the Whale rack on a wall?

Through the two holes in the bar, using screws with anchors suited to your wall: 6 mm expansion anchors for masonry and concrete, toggle bolts or drywall anchors for drywall, short screws for wood. Hold the rack up, mark the holes with a pencil, drill, and tighten the screws – it takes about fifteen minutes. The 40 cm rack weighs about 1 kg, so it doesn't need any special fixings.

How do I clean Whale metal towel racks?

Use a dry or slightly damp microfiber cloth; the powder coating needs no sealing or polishing. Don't use abrasive cleaners or solvents; small scratches can be protected with RAL-matched touch-up paint.

See also

All coat and towel racks and other hangers and racks can be found in our shop. To complete the look, pair it with a metal wall shelf for small items and a decorative mirror in the same color. Also see: Skiing and Mountains coat rack and Octopus wall-mounted bathroom rack. Have a question about mounting or want a different motif? Write to us via the contact form.

Dimensions and choosing a size

Wall-mounted coat rack — how many hooks and what width?

A 40 cm wide coat rack usually has 5 hooks, a 60 cm one has 8, and an 80 cm one has 10. This metal rack has 40 × 20 cm and is flat — only the hooks stick out from the wall. Count your household's coats, bags and backpacks — the calculator below will suggest a size.

Your key holder 40 cm · matte black

Dimensions40 × 20 cmmeasured with the motif
Hooksusually 5 at 40 cm8 at 60 cm and 10 at 80 cm — exact number in the product description
What forjackets, coats and bagstowels in the bathroom, dish towels and aprons in the kitchen
Constructionflat — 3 mm steelmotif, rail and hooks are a single piece
Colormatte blackpowder coating on both sides · same price in every color
Mounting2 holes in the railchoose screws and wall plugs to suit your wall
Mounting height160–170 cm to the hooksfor children 100–120 cm

Sizes of this key holder

WidthHooksWho it's for
40 cmselected5up to 2 people
60 cm8up to 3 people
80 cm10up to 4 people

Who it's for — a coat and a bag per person, plus a hook for a guest. Height depends on the motif — at 40 cm wide it's usually 20–30 cm.

How many hooks do you need?

Enter how many people use the coat rack and how many coats and jackets hang on it day to day. We'll add one extra hook for a guest and suggest a size, which you can select with one click.

  • Enter the number of household memberseveryone needs at least one hook for everyday use

A cloakroom at work or an unusual wall? We'll make a custom-size coat rack, with a free quote: custom design.

Construction and detail

3 mm steel coat rack: how much weight can the hooks hold?

Each hook holds several kilograms, whether it's a winter jacket, a wool coat or a laptop bag. The whole metal coat rack is a single piece, with the design, rail and hooks cut from 3 mm steel without screws or joins, and it mounts to the wall with two screws.

Black metal coat rack: a 3 mm steel rail with hooks, shown without the design on a white background

Rounded corners

The rail corners and hook tips are rounded, so in a narrow hallway you won't catch your shoulder or sleeve on the coat rack.

Close-up of a metal coat rack hook: matte finish, 3 mm steel edge and a coat loop hanging from it

Hook close-up

A wide, smooth hook with a matte finish, so you can take a coat loop or hood off it without snagging on the edge.

Construction at a glance

  • 3 mm steelstays rigid even under heavy winter coats
  • One piecedesign, rail and hooks with no screws, rivets or glue
  • J-shaped hooksthey stick out 3–4 cm and hold a coat loop, a hood and a bag strap
  • 2 holes in the railthe rack mounts on two screws

The photos are for illustration and show the coat rack without the design, just the rail with hooks in matte black. The design depends on the model, and you choose the size and color in the form.

Color

Black, white or anthracite coat rack: which color should you choose?

For a light hallway choose matte black, for gray walls and concrete choose anthracite, and for a dark wall choose white. Every color costs the same. The 3 mm steel and powder coating are identical in every version, and white on a white wall almost disappears, so what you mainly see is what hangs on the hooks.

Three metal coat racks one above the other: matte black, anthracite and white

Three colors in one shot

The same coat rack in black, anthracite and white. Compare them to see which best suits your wall and your household's coats.

Choose a color

  • Matte blackA bold graphic on a white or cream wall. The most versatile choice for a hallway.
  • AnthraciteCalmer than black. Works with gray walls, concrete, dark wood and graphite tiles.
  • WhiteOn a light wall it blends into the background, and on a dark one it picks out the design with a light line. A good choice for bright bathrooms.

Illustrative photo without the design — the design depends on the model, and you choose the size and color in the form.

Which color suits which interior?

InteriorRack colorWhy
White or cream wallmatte blackthe design is visible from across the room, and black suits dark coats
Gray or beige wallanthracite or matte blacktone on tone or with a strong contrast
Concrete, brickmatte black or anthracitea loft-style coat rack that suits raw textures
Dark wall: graphite, navywhitelight motif outline against a dark background
Tiled bathroomwhite or matte blackto match the faucet, mirror frame and accessories

The powder coating covers the plate on both sides and all edges of the motif. Need a RAL color for the whole series? We'll prepare it as part of a custom order project — with a free quote.

Rooms

A rack for towels, dish towels or a bathrobe: hooks for the bathroom, kitchen and bedroom

The same hooks work in any room. What changes is what hangs on them and the mounting height. In a hallway and bedroom, mount the hooks 160–170 cm above the floor, in a bathroom 150–170 cm, and in a kitchen 150–160 cm, away from the cooktop.

FeatureEntrywayBathroomKitchenBedroom
What hangs on itjackets, coats, bagstowels and bathrobesdish towels, aprons, oven mittstomorrow's clothes, a bathrobe, handbags
Hook height160–170 cm150–170 cm150–160 cm160–170 cm
Below the racka bench or shoe cabineta sink, usually 75–90 cma countertop, usually 85–90 cma dresser or an empty wall next to the wardrobe
For kids100–120 cm100–110 cm——
What to watch out fora coat must not touch the benchkeep the towel away from the sink and ensure good ventilationaway from the cooktop and steam from potssize to fit the wall next to the wardrobe

Mounting

Wall-mounted hallway coat rack: how high to hang it and how to install it

Hang the hooks 160–170 cm (63–67 in) above the floor, so a coat won't touch the bench or shoes and an adult can reach the hooks without standing on tiptoe. The rack hangs on two screws through the holes in the rail, and installation takes about 15 minutes.

Wall plugs and screws

WallFixing
Masonry, concrete, brick6 mm expansion plugs and screws
Plasterboardheavy-duty drywall anchors, e.g. toggle (molly) type
Wood, wall panelingwood screws, no plugs needed
Bathroom tilestile drill bit, then a 6 mm plug

Before drilling, check with a detector that no wires or pipes run through the wall.

How much the rack itself weighs

WidthWeight
40 cmapprox. 1–1.6 kg
60 cmapprox. 2.3–3.5 kg
80 cmapprox. 4.1–6.2 kg
Each hookholds several kilograms

The weight depends on the design. With outerwear on all the hooks, the load increases by several to a dozen or so kilograms. On drywall with an 80 cm width, drive a screw into a frame stud if the hole lines up with one.

  1. Choose a wall

    A full wall next to the door, with room for a bench or shoe cabinet. Leave about 10 cm from the door frame and the corner.

  2. Mark the height

    Hooks 160–170 cm above the floor, 100–120 cm for children. Hold the rack up, level it and mark both holes.

  3. Drill and insert the plugs

    Choose the drill bit and plugs to suit your wall, following the table. Drill the holes exactly at the marked points.

  4. Tighten the screws and hang your coats

    Drive in both screws until the rail sits flat against the wall. Don't overtighten them — that way the screw head won't scratch the coating.

Metal4Home does not install key racks at customers' homes — installation is simple and takes a few minutes. Choose screws and plugs to suit your type of wall.

Interiors

A coat rack for the hallway, mudroom and kids' room: where does it work well?

A flat coat rack takes up no floor space, so it works where every centimeter counts. Above a bench it creates an entryway zone, in a child's room it teaches tidiness, and in a bathroom it replaces several single hooks.

Black metal coat rack above a bench in a bright hallway, with a coat and a canvas bag on the hooks

Above a hallway bench

Hooks about 165 cm above the floor: coats hang above the bench, with room for shoes underneath.

  • Narrow hallway

    A flat coat rack doesn't block the way, even where two people pass each other.

    40–60 cm

  • Mudroom

    Wet jackets dry away from the rest of the home, and there's room next to it for a key rack.

    60–80 cm

  • Kids' room

    Hang a children's coat rack 100–120 cm above the floor, so jackets and backpacks always have their place.

    40 cm

  • Bathroom

    A rack for towels and bathrobes keeps things tidy by the sink and shower.

    40–60 cm

  • Kitchen

    Dish towels, aprons and oven mitts close at hand, away from the cooktop.

    40 cm

  • Office, waiting room, workplace

    Clients' coats on a rack that matches your interior style: a made-to-measure series.

    custom series

Illustrative photo without the design — the design depends on the model, and you choose the size and color in the form.

Wall-mounted or freestanding

Wall-mounted or freestanding coat rack: which is better for a small hallway?

For a small hallway, a wall-mounted coat rack is the better choice: it frees up the floor, won't tip over under the weight of jackets and doesn't get in the way of cleaning. Choose a freestanding rack where you can't drill into the wall or want to move it around.

Black wall-mounted coat rack in a narrow hallway, leaving the passage clear

In a narrow hallway

Even in a hallway only about a meter wide the passage stays clear, and a shoe cabinet fits under the coats.

FeatureWall-mounted coat rackFreestanding coat rackHallway wardrobe
Floor spacenone: only the hooks stick out from the wallthe base, usually 40–50 cm in diameterusually about 60 cm deep
Stabilityscrewed to the wallcan tilt when heavy jackets hang on one sidestable
Mounting2 screws, about 15 minutesno drillingfurniture assembly
Outerwearin plain sight, within reachin plain sighttucked away
Lookdesign — wall decorationfurniture in a hallwaybuilt-in unit

Illustrative photo without the design — the design depends on the model, and you choose the size and color in the form.

Durability

Coat hooks for everyday use — wet jackets, bathroom steam and heavy coats

Coat hooks work every day: they take wet jackets after the rain, towels in a steamy bathroom and heavy winter coats. The 3 mm steel stays rigid, and the powder coating protects it from moisture.

Black coat rack in a mudroom with a wet raincoat on a rainy day

Wet outerwear

A jacket dries on the hook after the rain, and the powder coating protects the steel underneath — just wipe the drops off the rail.

Black towel rack on a warm gray tiled bathroom wall, with towels and a bathrobe on the hooks

Bathroom steam

Towels and a bathrobe hang close to the shower, and the coating copes well with humid air. Make sure the room is well ventilated.

Black wall hook rack with winter coats, a down jacket, a scarf and bags on every hook

Heavy coats

In winter the hooks hold coats, down jackets and bags — the 3 mm steel stays rigid even with every hook in use.

Black coat rack in a sunlit entryway by the window

Sun

The matte coating doesn't shine in the harsh light by the window — the hook rack doesn't cause glare, even when the sun hits the wall directly.

Black coat rack in summer — a straw hat, a linen bag and a beach towel on the hooks

All year round

In summer the hooks hold hats, lightweight bags and beach towels; in winter — caps, scarves and coats.

Illustrative photos without a motif — the motif depends on the model, and you choose the size and color in the form.

Match it

An entryway in one color — a mirror, shelf and wall art to match the hook rack

A modern entryway hook rack looks best alongside accessories in the same color: a key rack by the door, a mirror and a shelf for small items.

What's included

  • A 3 mm steel hook rack — design, rail and hooks in a single piece.
  • Rail with 2 mounting holes — choose screws and wall plugs to suit your wall.

You may also need

  • Wall plugs and screws suited to your wall — see the table in the installation section.
  • A level and a stud and pipe detector.
  • A soft microfiber cloth.

For businesses and developments

Made-to-measure cloakroom hook racks for hotels, restaurants, offices and preschools

We make coat racks in series — for cloakrooms, reception areas, hotel rooms and bathrooms — with a logo, a design chosen to suit the interior and a number of hooks adapted to the space. For architects, interior designers, developers and institutions.

  • A cloakroom in a restaurant, cafe or office — long hook racks with many hooks.
  • Hotels and apartments — towel and coat hooks in one design.
  • Preschools and schools — designs for kids and hook racks sized to their height.
  • Free quote and visualization before we start your order.

Questions

Coat rack — frequently asked questions

How many hooks does the coat rack have?

Usually 5 at a width of 40 cm, 8 at 60 cm and 10 at 80 cm; some designs have fewer, e.g. 4, 6 and 8. We give the exact number for this design in the product description. This hook rack has 40 × 20 cm.

What size of jacket hook rack should I choose?

For 1–2 people 40 cm is enough, for 3 people — 60 cm, and for 4 or more — 80 cm, allowing for one coat and one bag per person plus one hook for a guest. If you have several coats per person, choose a wider option.

At what height should I hang a coat rack?

In an entryway, hang the hooks 160–170 cm above the floor — that way a coat won't touch the bench. In a bathroom 150–170 cm, in a kitchen 150–160 cm, and a kids' hook rack — 100–120 cm (in a bathroom 100–110 cm).

How many jackets will a metal hook rack hold?

Usually as many as it has hooks — 5, 8 or 10, one jacket per hook, and a thick down jacket may take up two. Each 3 mm steel hook holds several kilograms; for masonry, 6 mm expansion anchors are enough, and for drywall choose heavy-duty anchors.

Is a coat rack suitable for a bedroom?

Yes — hang it 160–170 cm above the floor next to the wardrobe, and the hooks will hold tomorrow's clothes, a bathrobe and handbags.

Is this a good towel rack for the bathroom?

Yes — the powder coating handles moisture well, and the hooks will hold towels and bathrobes. Hang it 150–170 cm above the floor so the towels don't touch the sink, and keep the room well ventilated.

Can the rack be mounted on drywall?

Yes, using heavy-duty drywall anchors, e.g. toggle (molly) type. With the 80 cm width and heavy coats, drive a screw into a stud if one lines up with a mounting hole.

What color of coat rack should I choose?

For a white wall — matt black; for a gray wall and concrete — anthracite (or black for stronger contrast); for a dark wall — white. All colors cost the same.

Will thick winter jackets fit on the rack?

Yes, although with hooks spaced about 8 cm apart, a thick down jacket may take up two hooks. If you hang a lot of outerwear in winter, choose a wider version.

Is this a good rack for kids?

Yes — hang it 100–120 cm above the floor so your child can hang up their own jacket and backpack. Animal and nature motifs suit a kid's room well.

How do I clean a metal coat rack?

With a dry or slightly damp microfiber cloth, without abrasives or solvents. You can touch up minor scratches with touch-up paint in the rack's color.

Do you make made-to-measure coat racks?

Yes. As part of a custom order, we'll adjust the width, number of hooks, motif and color from the RAL palette — also for cloakrooms, hotels and preschools. The quote is free: custom design, B2B cooperation.