
Product code: 31107.140.120.C
Buying for a business or in larger quantities? Request a B2B quote
The three-pumpkin tower measures 140 cm tall by 120 cm wide and fits between two shrubs or beside the front steps. The faces read from 8 to 12 m away. It's a front-of-house piece, placed in the line of sight of someone walking along the sidewalk — and the only one in the collection that also works as a harvest decoration in September.
The whole figure is a single piece of flat 3 mm Corten steel plate — the figure, its surroundings and the base are all areas of the same continuous sheet. There are no layers, spacers or stuck-on details: seen from the side, the piece is 3 mm thick across its entire surface. The openings range from 80 to 180 mm, no part is narrower than 60 mm anywhere, and 30 to 40% of the total surface is open, so wind passes through the figure instead of pushing against it. The bottom edge is straight and level across the full width. Two supports are enough at a width of 120 cm. Nothing is driven into the ground, so the figure stands just as well on grass, gravel or paving.
Product details
The three-pumpkin tower comes in two sizes that differ in height by 30 cm. The design is identical in both; only the scale, weight and number of support points change. It is made by Metal4Home, a brand of Adjatech Metalworking Sp. z o.o., a manufacturer of metal decorations based in Poznań.
| Size | Height | Width | Weight | Support |
|---|---|---|---|---|
| Smaller | 110 cm | 95 cm | 9 kg | 2 supports |
| Larger | 140 cm | 120 cm | 15 kg | 2 supports |
Three pumpkins are stacked one on top of the other, each with a different expression: the bottom one grins, the middle one has a round mouth, and the top one has squinting eyes and furrowed brows. Ribs run through all three as vertical gaps 80 to 120 mm wide, and leaves and a curled stem at the very top emerge at the points where they meet.
The patina that develops over the first few months stops corrosion beneath it: the rust reaches only a few hundredths of a millimeter and goes no deeper, so 3 mm plate will last dozens of seasons without painting, oiling or being taken down for winter. After the season the figure stores flat — you unscrew the supports and are left with a 3 mm plate that slides behind a wardrobe or under a garage shelf.
Questions and answers
The smaller one measures 110 × 95 cm and reads from 5 to 10 m away — it works well beside a path, in a flower bed or on a small lawn. The larger one, 140 × 120 cm, works from 15 to 20 m and is the choice for the front, facing the street or driveway. The difference in weight is 6 kg.
For the first 6 to 12 months, yes — rust runs off with the rain and soaks into porous concrete. On grass and in bark mulch it isn't visible at all. If it is going to stand on pavers from the start, put a rubber or HDPE sheet underneath that is 10 cm larger than the outline of the supports, and rinse off fresh streaks within 24 hours.
Without added weight, the figure starts to tilt in wind of around 10 m/s, or 36 km/h. A 35 × 35 cm paving slab placed on each support raises the threshold to roughly 15 m/s. When a storm warning is issued, the simplest thing is to lay it flat on the grass; it weighs 9 or 15 kg, so it takes a minute.
The plate arrives gray-blue. The first reddish-brown film appears after 2-3 weeks, an even rust color after 3-6 weeks, and the full patina matures over 12-24 months. The pace depends on wet-dry cycles, so it goes faster on an open lawn than under a roof.
Metal pumpkins don't rot or collapse after two weeks — the one argument you can't make for a pumpkin from the field.
The three-pumpkin tower is a decoration made from a single sheet of 3 mm Corten steel, available in two sizes: 110 and 140 cm tall. It stands on supports bolted on at the back, with nothing driven into the ground, so it works on grass, gravel and paving.
| Dimensions: | 110×95 cm, 140×120 cm |
|---|---|
| Finishes: | Corten |
| Room | Garden |
| Finish and color | |
| Size | |
| Mounting and display | Freestanding, Outdoor (weather-resistant) |
| Themes |
Dimensions and stake
A metal garden decoration is a single flat piece of sheet steel: the silhouette runs into a stake that you push into the soil of a flower bed, lawn or planter — no joints and no screwing together. The stakes follow one standard across the whole collection: length 50, 58 or 65 cm depending on size and 15 cm in the ground. Check how tall your chosen decoration will stand and whether it will be visible above the plants.
Your decoration
Choose the plants around the spot where the decoration will stand, or enter their height.
Stake standard in the collection
8 mm flat stake — one piece with the silhouette, pushed in 15 cm.
| Size | Stake length | Bottom of the silhouette above ground |
|---|---|---|
| Small | 50 cm | 35 cm |
| Medium | 58 cm | 43 cm |
| Large | 65 cm | 50 cm |
Halloween series: 25 mm flat spike made of 3 mm sheet steel, same lengths.
Finishes
Our decorations come in Corten steel with a natural rusty patina or in painted versions — white, red, yellow, green and black, and for some designs also anthracite (available colors depend on the design). The Halloween series comes in Corten or matte black. The silhouette and stake are one piece, so they always have the same finish.
A warm, rusty brown that deepens with every season. The patina protects the steel — no painting and no maintenance.
An even coating in several colors. A colorful silhouette makes a great accent in a group of Corten decorations or in a planter.
The silhouette flows seamlessly into the stake — it's one piece of sheet steel, with no joins and no screws. The thickness of the steel is visible at the edge.
A uniform coating on the silhouette, the edges and the stake.
| Feature | Corten | Colors (painted versions) |
|---|---|---|
| Look | rusty patina, warm brown | white, red, yellow, green or black; anthracite for some designs |
| Change over time | the color darkens and deepens | stable color |
| Care | no painting or sealing needed | wash with water, no abrasive cleaners |
| First few weeks | rain may stain light-colored paving under the decoration | no runoff stains |
| Best suited for | naturalistic gardens, grasses, wood, stone | an accent in a Corten group, colorful flower beds, children's gardens |
Photos are illustrative — they show various designs and sizes from the collection; the design you choose may look different.
Styling idea
The most common mistake is a row of identical decorations at even intervals — it looks like a picket fence. Groups in different sizes, set deep into the bed and at different heights, work much better. Distances are given between stakes.
Three decorations in an uneven triangle: a large one at the back, a medium and a small one at the front, 25–40 cm between stakes. The simplest layout, and it always looks natural.
Three decorations in a loose group at the back of the bed and one larger, standalone piece — closer to where you view it from, 1.5–2.5 m from the group. The accent draws the eye, and the group in the background gives the bed depth.
Small sizes at the front of the bed, large ones at the back. Every silhouette is visible above the plants, and the bed gains depth.
Alternating on both sides, every 1–1.5 m and in different sizes. The silhouettes lead the way to the door instead of standing in a line.
5–7 small and medium silhouettes in a loose cloud — denser in the middle, sparser at the edges. Works well with grasses and wildflower meadows.
One decoration per planter, set at ⅓ of the width, not in the center. In a group of planters, each silhouette stands at a different height.
Photos are illustrative — we show the layouts using various designs from the collection; the design you choose may look different.
Set a few silhouettes at a slight angle to the path or patio — from different spots in the garden you'll see them from a different side. In autumn, add Halloween decorations to stake into the ground — they have the same stake standard.
Uses
A triangle-shaped group among perennials and grasses, with a single accent further back — decoration all season long.
One small or medium decoration per planter — off to the side, not in the center.
Silhouettes placed alternately on both sides lead guests to the door.
A small size near the corner of the raised bed, a larger one further back in the bed.
In autumn: pumpkins, bats and ghosts — Halloween decorations with the same stake standard.
Photos are illustrative — they show various designs and sizes from the collection; the design you choose may look different.
Weather resistance
Steel doesn't rot like wood or fade like plastic, so metal garden ornaments can stay outdoors all year round — even driven into the ground in winter.
Water does no harm — Corten patinates faster with moisture, and the coating protects the colored silhouettes.
Steel doesn't crack in frost, so the decorations can overwinter in the flower bed. Don't pull them out of frozen ground by force.
The patina and colored coating don't fade. The silhouettes cast a distinct shadow on the flower bed.
A stake driven in about 15 cm holds the silhouette upright. In loose, freshly dug soil, press the soil down around the stake.
From spring through winter — no storing away and no painting.
Photos are illustrative — they show various designs and sizes from the collection; the design you choose may look different.
Mounting
A flower bed, lawn or planter with soil. The stake needs about 15 cm of soil — don't drive it into pavers or concrete.
In compacted soil and dry clay, first make a hole with a thin rod (8–10 mm) or a narrow slit with a trowel. A flat stake can bend under heavy resistance.
Hold the stake just above the ground, not by the silhouette, and push it in vertically to about 15 cm — no hammer needed.
Set the silhouette upright and press the soil down around the stake.
Included
Garden decoration manufacturer
As a manufacturer, we can make garden decorations with your own design, logo or lettering — single pieces or in a series for garden centers, florists, hotels and show gardens.
Questions
About 15 cm — that's enough for the decoration to stand upright in a flower bed, lawn or planter. In compacted soil, first make a hole with a thin rod and push the stake in vertically, holding it just above the ground rather than by the silhouette.
Flat, cut from the same steel sheet as the silhouette — the decoration is a single piece, with no joints or bolts, in one finish. The length depends on the size: 50 cm for the small, 58 cm for the medium and 65 cm for the large. Classic designs have a slim stake with a width of 8 mm, while the Halloween series has a spike 25 mm made of sheet steel 3 mm.
The bottom edge of the silhouette stands 35–50 cm above the ground, depending on the size, and the top sits higher by the height of the silhouette (usually 45–80 cm). We show the exact dimensions of your chosen size in the "Your decoration" section, and the tool next to it checks whether the silhouette will be visible above your plants.
Yes — it works best with the small or medium size in a planter with at least 20 cm of soil. The stake will then go into the 15 cm and the decoration will stand securely.
It won't break off — the stake and the silhouette are a single piece of sheet steel, with no joints that could give way. It can only be bent by force, for example by driving it into compacted ground without a prepared hole or by pulling on the silhouette. Push the decoration in and pull it out holding the stake just above the ground.
Driven into the 15 cm it stands upright even in stronger winds. In loose, freshly dug soil, press the ground down around the stake or push it in a little deeper.
Yes. Steel doesn't crack in frost, and Corten and the colored coating are resistant to snow and moisture. If you want to move the decoration in winter, wait until the ground thaws — don't pull the stake out by force.
In the first weeks, while the patina is forming, rain may wash rusty residue onto light-colored slabs or stones right beneath the decoration. In a flower bed, on a lawn or in bark mulch it doesn't matter, and once the patina has stabilized the runoff stops.
Just wash them with water, a mild detergent and a soft cloth. Don't use abrasive cleaners or steel wool, which can scratch the coating.
Instead of a row, choose one of these layouts: a triangle, a group with an accent piece, tiers, or a rhythm on both sides of a path. Mix sizes, keep 25–40 cm between stakes within a group and 1–1.5 m between groups. The silhouettes should stand above the plants — for tall perennials, choose a larger size.
Yes. We will make decorations with your own motif, logo or lettering, including in runs for garden shops and garden centers — to the same stake standard. The quote is free: custom design, B2B cooperation.
Haunted Tree – Corten Steel Metal Garden Decoration€293.26
Werewolf on a Rock – Large Corten Steel Garden Figure€254.13
Zombie with a Gravestone – Corten Steel Garden Decoration€269.35
Vampire in a Cape – Corten Steel Garden Sculpture€330.22
Headless Figure – Metal Garden Statue€241.09
Witch with a Broom – Corten Steel Garden Decoration€284.57
Tombstone with a Raven – Steel Lawn Decoration€241.09
Sitting Cat – Metal Garden Sculpture€206.30We use cookies to make it easier for you to navigate and to enable certain features. You will find detailed information about all cookies below under each consent category.
Cookies classified as "necessary" are stored in your browser because they are essential for enabling the basic functionality of the website.
We also use third-party cookies that help us analyze how you use this website, store your preferences, and deliver content and ads that are relevant to you. These cookies will be stored in your browser only with your prior consent.
You can enable or disable some or all of these cookies, but disabling some of them may affect your browsing experience.
