Favorites

Tombstone with a Raven – Steel Lawn Decoration

€323.70

Lead time for the selected product variant: Choose a variant

  • PayPal
  • Visa
  • Mastercard
  • Google Pay
  • Apple Pay

Buying for a business or in larger quantities? Request a B2B quote

Tombstone with a Raven – Steel Lawn Decoration

At 140 cm tall, the tombstone works from 6 to 10 m away and looks good in a group: two or three placed 80 cm apart create a scene, while a single one stays an accent by the path. The raven sits on the top edge, so don't place the figure under a branch — the bird's silhouette will disappear against the leaves. At 14 kg, it can be moved around during the season.

Craftsmanship and Material

The whole figure is a single piece of flat 3 mm Corten steel plate: the figure, its surroundings and the foot are all areas of the same continuous sheet. There are no layers, spacers or glued-on details: seen from the side, the piece is 3 mm thick across its entire surface. The openings range from 80 to 180 mm, no part is narrower than 60 mm anywhere, and 30 to 40% of the surface is open in total, so wind passes through the figure instead of pushing against it. The bottom edge is straight and level across the full width. Two supports are enough at a width of 100 cm. Nothing is driven into the ground, so the figure stands just as well on grass, on gravel and on paving.

Product details

Variants and dimensions

The Tombstone with a Raven comes in two sizes that differ in height by 30 cm. The design is identical in both; what changes is the scale, the weight and the number of support points. It is made by Metal4Home, a brand of Adjatech Metalworking Sp. z o.o., a manufacturer of metal decorations from Poznań, Poland.

Size Height Width Weight Support
Smaller 110 cm 80 cm 9 kg 2 supports
Larger 140 cm 100 cm 14 kg 2 supports

Design

The raven sits on the right corner of the tombstone with its tail raised, shown in profile. The tombstone slab is cracked in two places, and the ornamental band at the bottom is made up of 14 leaves. The RIP letters and the cracks are cut all the way through, and the strip of grass at the base runs down to a straight lower edge.

Durability and storage

The patina that develops over the first few months stops corrosion beneath it: the rust reaches only a few hundredths of a millimeter and goes no deeper, so 3 mm plate will last dozens of seasons without painting, oiling or being taken down for winter. After the season the figure stores flat — you unscrew the supports and are left with a 3 mm plate that slides behind a wardrobe or under a garage shelf.

Questions and answers

Frequently Asked Questions

Which size should I choose?

The smaller one is 110 × 80 cm and reads from 5 to 10 m away — a good fit for a path, a flower bed or a small lawn. The larger one, 140 × 100 cm, works from 15 to 20 m and is the choice for the front of the house, facing the street or the driveway. The difference in weight is 5 kg.

Will the figure stain pavers?

For the first 6 to 12 months, yes — rust runs off with the rain and soaks into porous concrete. On grass and in bark mulch it isn't visible at all. If it is going to stand on pavers from the start, put a rubber or HDPE sheet underneath that is 10 cm larger than the outline of the supports, and rinse off fresh streaks within 24 hours.

Will it withstand strong wind?

Without extra weight, the figure starts to tip in winds of around 10 m/s, or 36 km/h. A 35 × 35 cm paving slab placed on each support raises the threshold to roughly 15 m/s. When a storm warning is issued, the simplest option is to lay it flat on the grass — it weighs 9 or 14 kg, so it takes a minute.

When will the figure turn rust-colored?

The plate arrives gray-blue. The first reddish-brown film appears after 2-3 weeks, an even rust color after 3-6 weeks, and the full patina matures over 12-24 months. The pace depends on wet-dry cycles, so it goes faster on an open lawn than under a roof.

More About the Product

The smallest figure in the collection and the only one you can carry with one hand: 14 kg at 140 cm tall.

The Tombstone with a Raven is a decoration cut from a single sheet of 3 mm Corten steel, available in two sizes: 110 and 140 cm tall. It stands on supports bolted on at the back, with nothing driven into the ground, so it works on grass, gravel and paving.

  • Dimensions: 110 × 80 cm and 140 × 100 cm (H × W)
  • Material: Corten steel (weathering steel)
  • Sheet thickness: 3 mm
  • Color: natural rust (patina)
  • Features: frost-resistant, year-round
  • Surface: grass, gravel, pavers
  • Use: garden, lawn, entrance
  • Style: an accent for arranging in a group, graveyard motif

Dimensions and stake

Garden decoration on a stake — height above ground and insertion depth

A metal garden decoration is a single flat piece of sheet steel: the silhouette runs into a stake that you push into the soil of a flower bed, lawn or planter — no joints and no screwing together. The stakes follow one standard across the whole collection: length 50, 58 or 65 cm depending on size and 15 cm in the ground. Check how tall your chosen decoration will stand and whether it will be visible above the plants.

Your decoration

Will the decoration be visible above the plants?

Choose the plants around the spot where the decoration will stand, or enter their height.

    Stake standard in the collection

    8 mm flat stake — one piece with the silhouette, pushed in 15 cm.

    SizeStake lengthBottom of the silhouette above ground
    Small50 cm35 cm
    Medium58 cm43 cm
    Large65 cm50 cm

    Halloween series: 25 mm flat spike made of 3 mm sheet steel, same lengths.

    Finishes

    Corten or Color? Finishes for Metal Garden Decorations

    Our decorations come in Corten steel with a natural rusty patina or in painted versions — white, red, yellow, green and black, and for some designs also anthracite (available colors depend on the design). The Halloween series comes in Corten or matte black. The silhouette and stake are one piece, so they always have the same finish.

    Corten garden decorations on flat stakes, top view on a white background — the silhouette and stake are one piece of sheet steel

    Corten — natural patina

    A warm, rusty brown that deepens with every season. The patina protects the steel — no painting and no maintenance.

    Metal garden decorations in colors — white, red, yellow and green — next to Corten decorations, staked upright on a white background

    Colors — weather-resistant coating

    An even coating in several colors. A colorful silhouette makes a great accent in a group of Corten decorations or in a planter.

    Macro: Corten patina and the silhouette blending into a flat stake — one piece of sheet steel, no joins

    Corten up close

    The silhouette flows seamlessly into the stake — it's one piece of sheet steel, with no joins and no screws. The thickness of the steel is visible at the edge.

    Macro: colored coating on the edge of a red garden decoration and on the flat stake

    Color up close

    A uniform coating on the silhouette, the edges and the stake.

    FeatureCortenColors (painted versions)
    Lookrusty patina, warm brownwhite, red, yellow, green or black; anthracite for some designs
    Change over timethe color darkens and deepensstable color
    Careno painting or sealing neededwash with water, no abrasive cleaners
    First few weeksrain may stain light-colored paving under the decorationno runoff stains
    Best suited fornaturalistic gardens, grasses, wood, stonean accent in a Corten group, colorful flower beds, children's gardens

    Photos are illustrative — they show various designs and sizes from the collection; the design you choose may look different.

    Styling idea

    How to Arrange Garden Decorations — 6 Tried-and-Tested Layouts

    The most common mistake is a row of identical decorations at even intervals — it looks like a picket fence. Groups in different sizes, set deep into the bed and at different heights, work much better. Distances are given between stakes.

    1. Three Corten garden decorations arranged in an uneven triangle in a flower bed — angled top view

      01Triangle

      Three decorations in an uneven triangle: a large one at the back, a medium and a small one at the front, 25–40 cm between stakes. The simplest layout, and it always looks natural.

    2. A group of three Corten garden decorations at the back of a bed by a hedge and a larger accent decoration in the foreground

      02Group with an accent

      Three decorations in a loose group at the back of the bed and one larger, standalone piece — closer to where you view it from, 1.5–2.5 m from the group. The accent draws the eye, and the group in the background gives the bed depth.

    3. Corten garden decorations in three rows on a deep flower bed — small ones in front, large ones at the back

      03Tiers

      Small sizes at the front of the bed, large ones at the back. Every silhouette is visible above the plants, and the bed gains depth.

    4. Corten garden decorations placed alternately on both sides of a path leading to the house

      04Rhythm along a path

      Alternating on both sides, every 1–1.5 m and in different sizes. The silhouettes lead the way to the door instead of standing in a line.

    5. Small and medium Corten garden decorations scattered among low ornamental grasses

      05Scattered among grasses

      5–7 small and medium silhouettes in a loose cloud — denser in the middle, sparser at the edges. Works well with grasses and wildflower meadows.

    6. Corten garden decorations in a group of planters on a patio — one in each planter, off to the side

      06Accent in a planter

      One decoration per planter, set at ⅓ of the width, not in the center. In a group of planters, each silhouette stands at a different height.

    Photos are illustrative — we show the layouts using various designs from the collection; the design you choose may look different.

    Set a few silhouettes at a slight angle to the path or patio — from different spots in the garden you'll see them from a different side. In autumn, add Halloween decorations to stake into the ground — they have the same stake standard.

    Uses

    Where to Place Metal Garden Decorations

    Three Corten garden decorations arranged in a triangle in a lavender bed, with a yellow sun in the background

    Flower bed

    A triangle-shaped group among perennials and grasses, with a single accent further back — decoration all season long.

    Garden decorations on stakes in three planters of different heights on a patio

    Planters on a patio and balcony

    One small or medium decoration per planter — off to the side, not in the center.

    Corten steel garden decorations placed alternately on both sides of the path to the house

    By the path and entrance

    Silhouettes placed alternately on both sides lead guests to the door.

    Metal garden decorations on stakes in raised vegetable garden beds

    Vegetable and herb garden

    A small size near the corner of the raised bed, a larger one further back in the bed.

    Corten steel Halloween decorations among pumpkins in an autumn flower bed by the front entrance

    Seasonal displays

    In autumn: pumpkins, bats and ghosts — Halloween decorations with the same stake standard.

    Photos are illustrative — they show various designs and sizes from the collection; the design you choose may look different.

    Weather resistance

    Garden decorations for any weather — rain, frost, sun and wind

    Steel doesn't rot like wood or fade like plastic, so metal garden ornaments can stay outdoors all year round — even driven into the ground in winter.

    Corten steel garden decorations on stakes in the rain — raindrops on the silhouettes and a wet patina

    Rain and moisture

    Water does no harm — Corten patinates faster with moisture, and the coating protects the colored silhouettes.

    Metal garden decorations in a winter garden — frost and snow on the edges of the silhouettes

    Frost and snow

    Steel doesn't crack in frost, so the decorations can overwinter in the flower bed. Don't pull them out of frozen ground by force.

    Colored and Corten steel garden decorations in full sun casting a shadow on the gravel

    Sun

    The patina and colored coating don't fade. The silhouettes cast a distinct shadow on the flower bed.

    Garden decorations on stakes standing upright among grasses bent by the wind

    Wind

    A stake driven in about 15 cm holds the silhouette upright. In loose, freshly dug soil, press the soil down around the stake.

    Corten steel garden decorations in spring among crocuses — left in the garden over winter

    All year round

    From spring through winter — no storing away and no painting.

    Photos are illustrative — they show various designs and sizes from the collection; the design you choose may look different.

    Mounting

    How to drive a garden decoration stake into the ground — 4 steps

    Flat stake of a Corten steel garden decoration driven into the soil of a flower bed
    1. Choose the spot

      A flower bed, lawn or planter with soil. The stake needs about 15 cm of soil — don't drive it into pavers or concrete.

    2. Prepare a hole

      In compacted soil and dry clay, first make a hole with a thin rod (8–10 mm) or a narrow slit with a trowel. A flat stake can bend under heavy resistance.

    3. Push it in vertically

      Hold the stake just above the ground, not by the silhouette, and push it in vertically to about 15 cm — no hammer needed.

    4. Straighten and press down

      Set the silhouette upright and press the soil down around the stake.

    Included

    What you get

    Included

    • A decoration in your chosen size and finish — the silhouette and stake are one piece.
    • Ready to push into the ground — no screwing, bolts or extra parts.

    Useful for arrangements

    • Several designs in different sizes — for the flower bed layouts described above.
    • A planter with soil for a patio or balcony — e.g. Corten steel garden planters.

    Garden decoration manufacturer

    Garden decorations with your own design and wholesale

    As a manufacturer, we can make garden decorations with your own design, logo or lettering — single pieces or in a series for garden centers, florists, hotels and show gardens.

    • Your own design, logo, name or house number — in Corten steel or in color.
    • Series and sets with the same stake standard, ready for sale.
    • Free quote and visualization for approval before production.

    Questions

    Frequently asked questions about metal garden decorations

    How deep should a garden decoration be driven in?

    About 15 cm — that's enough for the decoration to stand upright in a flower bed, lawn or planter. In compacted soil, first make a hole with a thin rod and push the stake in vertically, holding it just above the ground rather than by the silhouette.

    How long is the stake on the decoration?

    Flat, cut from the same steel sheet as the silhouette — the decoration is a single piece, with no joints or bolts, in one finish. The length depends on the size: 50 cm for the small, 58 cm for the medium and 65 cm for the large. Classic designs have a slim stake with a width of 8 mm, while the Halloween series has a spike 25 mm made of sheet steel 3 mm.

    How high will the decoration stand above the ground?

    The bottom edge of the silhouette stands 35–50 cm above the ground, depending on the size, and the top sits higher by the height of the silhouette (usually 45–80 cm). We show the exact dimensions of your chosen size in the "Your decoration" section, and the tool next to it checks whether the silhouette will be visible above your plants.

    Can the decoration be placed in a planter?

    Yes — it works best with the small or medium size in a planter with at least 20 cm of soil. The stake will then go into the 15 cm and the decoration will stand securely.

    Won't the stake bend or break off?

    It won't break off — the stake and the silhouette are a single piece of sheet steel, with no joints that could give way. It can only be bent by force, for example by driving it into compacted ground without a prepared hole or by pulling on the silhouette. Push the decoration in and pull it out holding the stake just above the ground.

    Won't the decoration blow over in the wind?

    Driven into the 15 cm it stands upright even in stronger winds. In loose, freshly dug soil, press the ground down around the stake or push it in a little deeper.

    Can metal decorations stay in the garden over winter?

    Yes. Steel doesn't crack in frost, and Corten and the colored coating are resistant to snow and moisture. If you want to move the decoration in winter, wait until the ground thaws — don't pull the stake out by force.

    Does a Corten steel decoration stain paving slabs and stones?

    In the first weeks, while the patina is forming, rain may wash rusty residue onto light-colored slabs or stones right beneath the decoration. In a flower bed, on a lawn or in bark mulch it doesn't matter, and once the patina has stabilized the runoff stops.

    How do I care for colored garden decorations?

    Just wash them with water, a mild detergent and a soft cloth. Don't use abrasive cleaners or steel wool, which can scratch the coating.

    How should I arrange several decorations so they look good?

    Instead of a row, choose one of these layouts: a triangle, a group with an accent piece, tiers, or a rhythm on both sides of a path. Mix sizes, keep 25–40 cm between stakes within a group and 1–1.5 m between groups. The silhouettes should stand above the plants — for tall perennials, choose a larger size.

    Can I order decorations with my own design or in bulk?

    Yes. We will make decorations with your own motif, logo or lettering, including in runs for garden shops and garden centers — to the same stake standard. The quote is free: custom design, B2B cooperation.