
Product code: 9303.110.CZ
Buying for a business or in larger quantities? Request a B2B quote
A walking bear drawn in a single line fills the lower part of the door panel, with a zigzag of mountain peaks above it. The design is understated – a few thin lines on a solid black plate – so the door keeps the character of a sturdy, solid gate. This design was created as a rustic sliding door for owners of mountain homes, vacation cabins and chalet-style interiors.
In the photo, the panel hangs on a track in a living room with wood paneling and a stone fireplace; the black steel contrasts beautifully with the warm wood. In a strongly rustic interior, it is this simple, graphic motif that makes the biggest impression.
It's a natural choice for a mountain home, a living room with a fireplace or a bedroom with a wooden ceiling – anywhere a classic plank barn door would feel too obvious. It works well with mountain and rustic interiors, with wood on the walls and a stone fireplace. The bear stands for strength and calm; combined with the mountains, it creates a motif that instantly sets the mood of the room as a "mountain lodge with character." Rooms: living room, bedroom, dining room.
This is a door leaf for mounting on your own sliding system. You get a 3 mm steel plate with a cut-out pattern, powder-coated – without a mechanism, track or handle. Any wall-mounted barn door system with a 60–120 kg load capacity will carry it without a problem; the rollers must accept a plate that is 3 mm thick (most have adjustment or spacers).
Tell us the hole spacing for the rollers in the order notes and we will drill the holes before painting. More on choosing a system in the sliding doors category.
Product details
Choosing the size is simple: opening width plus 10 cm, opening height plus about 10 cm. The standard panel height is 210 cm – enough for a 200 cm opening, with room left over for the track and clearance above the floor. The photo shows the 110 cm version.
| Door leaf (W × H) | Screening | Weight | Variant code |
|---|---|---|---|
| 90 × 210 cm | opening up to 80 × 200 cm | approx. 40.5 kg | 9303.90 |
| 100 × 210 cm | opening up to 90 × 200 cm | approx. 45 kg | 9303.100 |
| 110 × 210 cm | opening up to 100 × 200 cm | approx. 49.5 kg | 9303.110 |
You will find the full sizing rules, including for double doors and non-standard openings, in the category description; we will prepare any other size as part of custom order project.
We powder-coat the door leaf in one of three colors: matte black (as in the photo), white or anthracite. The coating is uniform on both sides and on the cut-out edges, so the door looks the same from the hallway and from the room. The price is the same for every color.
We quote a different color from the RAL palette or a non-standard size as part of custom order project – free of charge, with a visualization for your approval.
You screw the track to the wall above the opening – on a brick or concrete wall with the expansion anchors included in the system set, on a drywall wall into the studs or a wooden mounting beam. You hang the panel, which weighs about 49.5 kg (110 × 210 cm), on the rollers and set the bottom guide, which keeps the steel plate vertical. Stoppers at the ends of the track prevent it from sliding off.
A door frame is not needed; the edge of the opening only needs finishing with plaster or a trim strip. You will find a detailed description of installing wall-mounted sliding doors in the category.
Specifications
Questions and answers
Yes, and very well. Matte black steel is a natural partner for wood – the contrast between warm wood and a graphite plate is stronger than with wooden barn doors. For interiors like this, we recommend matte black or anthracite.
The weight depends on the width: 90 × 210 cm – approx. 40.5 kg, 100 × 210 cm – approx. 45 kg, 110 × 210 cm – approx. 49.5 kg. That's 3 mm steel reduced by about 9% for the cutouts. The track carries the weight, so a single finger is enough to slide it every day.
A soft cloth is enough – dry or slightly damp; you can dust the cut-outs with a brush or a vacuum with a brush attachment. The powder coating needs no sealing or repainting. Avoid abrasive cleaners and solvents, and cover any scratches with touch-up paint in the matching RAL color.
No – you're buying just the door leaf, which is a steel panel with a cut-out pattern. You choose the track, rollers, floor guide and handle separately, from any wall-mounted barn door system with a load capacity of at least 60 kg. We explain how to choose a system in metal sliding doors category.
See also
Compare this design with others in the category openwork steel sliding doors. If there is a radiator under the window, match the doors with an openwork radiator cover – the same openwork pattern on the door panel and the cover ties the room together. We also recommend: Rays loft door and Compass Rose sliding door for a hallway. Have a question about size or the sliding system? Write to us via contact form.
| Finishes: | Anthracite, White, Black |
|---|---|
| Dimensions: | 100×210 cm, 110×210 cm, 90×210 cm |
Dimensions
A sliding door panel is always larger than the opening it covers — it overlaps the wall by about 5 cm on each side and about 5 cm at the top. This hides the gaps and looks good in any position. Choose a width and we'll show you which opening it fits.
Need a different size? Write to us — we'll prepare a quote for a made-to-measure door panel.
Choose the size where "Fits opening" is equal to or larger than your measurements.
Finishing
We make every pattern in three finishes. Matt black emphasizes the openwork design and suits loft-style interiors, white blends into a light wall, and anthracite is a softer, elegant alternative to black.
The price does not depend on the finish
Illustrative photos — the door panel pattern in the photos may differ from the one you choose.
Included
Choose the sliding system to match the width and weight of the door panel — check its maximum load capacity.
Construction
Every element of the openwork is joined to the door panel frame. Nothing sticks out or rattles when you slide the door, and the panel stays rigid.
We design the patterns to let light through and cast a striking shadow while still separating the rooms — it's a door, not a window.
The matt coating is resistant to scratches and indoor moisture. For everyday care, simply wipe it with a damp cloth.
Mounting
You mount the door panel on a wall-mounted sliding system — the track runs above the opening, and the door slides along the wall. Next to the opening you need free wall space as wide as the door panel.
Check the width and height of the opening and the free wall space next to it that the door panel will slide onto.
Screw the track in above the opening, level, following the instructions for your chosen sliding system.
Attach the carriages to the top edge of the door panel, along with the handle — following the system instructions.
Hang the door panel on the track, set the stops and the floor guide. Done.
Uses
It screens the inside of the closet, while the openwork lets it breathe.
No space is lost to a swinging door, which makes it ideal next to a bed or wardrobe.
It sets your workspace apart without cutting it off from the light in the rest of the house.
An elegant partition that becomes a showpiece of the whole wall.
Illustrative photos — the door panel pattern in the photos may differ from the one you choose.
Questions
No. The set includes only the openwork door panel in the size and finish you choose. You select the sliding system separately — the track with rollers, the stops and the floor guide — to suit the width and weight of the panel.
The panel should be about 10 cm wider than the opening (about 5 cm on each side) and about 5 cm taller. For example, a 90 × 210 cm panel fits an opening up to about 80 cm wide and up to about 205 cm high. Next to the opening you need a free section of wall as wide as the panel.
The patterns are openwork in moderation: they let light through and cast a striking shadow, but they still visually separate the rooms. Where you need full privacy, choose a pattern with a denser design or write to us — we'll advise you.
Yes. If your opening requires a different size, write to us — we'll prepare a quote for a made-to-measure panel in the pattern and finish you choose.
Simply wipe the panel with a soft, damp cloth. Do not use abrasive cleaners or solvents, so you don't dull the coating.
Tree Metal Sliding Door – Openwork Loft-Style Door Leaf 9331€388.91
Fox Bedroom Sliding Door – Openwork Steel Panel 9328€356.30
Sound Wave Loft Sliding Door – Metal Panel with Lines 9325€388.91
Portrait Sliding Room Door 110 cm – Loft Metal Panel 9322€356.30
Deer Metal Sliding Door – Openwork Panel with Antlers 9323€388.91
Modern World Map Sliding Door – Openwork Metal Panel 9320€428.04
Herringbone Loft Sliding Door – Patterned Metal Panel 9316€428.04
Horse Loft Vestibule Door – Metal Sliding Panel 9317€388.91We use cookies to make it easier for you to navigate and to enable certain features. You will find detailed information about all cookies below under each consent category.
Cookies classified as "necessary" are stored in your browser because they are essential for enabling the basic functionality of the website.
We also use third-party cookies that help us analyze how you use this website, store your preferences, and deliver content and ads that are relevant to you. These cookies will be stored in your browser only with your prior consent.
You can enable or disable some or all of these cookies, but disabling some of them may affect your browsing experience.
