
Product code: 31708
€45.43
Buying for a business or in larger quantities? Request a B2B quote
Four tealights set on the diagonals of the base light the silhouette from every side: the two front ones outline the cutouts, the two rear ones cast a glow along the edges. With 45% open area, what you mostly see behind the silhouette is the glow on the edges rather than the flames themselves. A set of four candles gives 4 hours of burn time, because they burn at the same time.
A pumpkin with a cut-out face: triangular eyes, a triangular nose and a grin with two fangs, with four ribs marked by through-cuts. Above it sits a witch's hat with a bent tip.
Three flat 3 mm steel plates: a Ø 24 cm base, a plate with the silhouette and a 16 × 16 cm stabilizing fin. The plate and fin cross at a right angle on a notch cut halfway into each of them, and both lock into the base on tabs. The notches are cut at 3.2 mm instead of 3.0 mm, because powder coating adds 60-80 µm per side — without this allowance the joint would jam the first time you assemble it. Zero welds, zero screws.
Product details
| Element | Dimension | Share of weight |
|---|---|---|
| Base with 4 sockets | Ø 24 cm, sockets Ø 40 mm | 0,95 kg |
| Silhouette plate | 20 × 28 cm | 0,73 kg |
| Stabilizing fin | 16 × 16 cm | 0,37 kg |
| Complete set | 3 pieces, 3 mm steel | 2,05 kg |
The flame axis sits 49 mm from the nearest plate, because the sockets lie on the diagonals of the base, not on the axes of the plates. The silhouette reaches 85°C 5 cm above the wick and 45°C 20 cm above it. The bottom of the aluminum cup is 70-90°C at the end of the burn, so put a coaster under the holder. Do not place curtains, napkins or dry decorations closer than 30 cm to the flame.
The 60-80 µm powder coating in matte black keeps its shade for dozens of seasons; 3 mm steel doesn't dent when knocked over and doesn't warp over the flame. The product is intended for indoor use — the coating is applied without a zinc primer, so on a patio it will start to wear after two or three seasons. After the season, the holder breaks down into 3 flat plates with a combined thickness of 9 mm. The manufacturer is Metal4Home, a brand of Adjatech Metalworking Sp. z o.o., a maker of metal decorations based in Poznań.
Questions and answers
Yes — the holder is 40 mm, and a standard European tea light is 38 mm, so there is 2 mm of play on the diameter and 1 mm all around. Candles in glass over 40 mm, as well as taper and pillar candles, won't fit, because they have no support in the holder.
Four hours. The four tea lights burn at the same time, so 16 hours is the total burn time and only describes wax consumption. One tea light holds 12-14 g of wax and burns for about 4 hours, so the set lasts one evening.
It won't scorch, but it may dull: toward the end of the burn, the bottom of the aluminum cup reaches 70-90°C (158-194°F), and that heat passes through the steel base into the tabletop. On oiled and varnished wood it leaves a matte mark 24 cm in diameter — put a coaster under the candle holder.
Five centimeters above the wick the sheet metal reaches 85°C (185°F), and 20 cm above the wick it reaches 45°C (113°F), so the upper part of the silhouette stays cool and the lower part does not. The flame axis sits 49 mm from the nearest plate, because the holders are placed on the diagonals rather than on the axes — with an on-axis layout it would be zero.
| Weight | 2 kg |
|---|---|
| Dimensions | 24 × 24 × 28 cm |
| Dimensions: | 20×28 cm |
| Finishes: | black |
| Finish and color | |
| Size | |
| Themes | |
| Mounting and display | For table and shelf |
Tealight Holder with a Raven on a Gravestone€45.43
Skull Tea Light Holder – Halloween Skulls€47.61
Ghost Tea Light Holder – Halloween Ghost€47.61
Witch Tea Light Holder – Halloween Witch€47.61
Bat Tea Light Holder – Halloween Bat€51.96
Haunted House Tea Light Holder€47.61
Cat Tea Light Holder – Halloween Cats€45.43
Spider Web Tea Light Holder – Halloween Spider Webs€49.57We use cookies to make it easier for you to navigate and to enable certain features. You will find detailed information about all cookies below under each consent category.
Cookies classified as "necessary" are stored in your browser because they are essential for enabling the basic functionality of the website.
We also use third-party cookies that help us analyze how you use this website, store your preferences, and deliver content and ads that are relevant to you. These cookies will be stored in your browser only with your prior consent.
You can enable or disable some or all of these cookies, but disabling some of them may affect your browsing experience.
